Slab Testing Machine
Slab Testing Machine
EKE 327:
• Fully Automatic
• Graphical Data Acquisition Control System
• Two Pistons with Capacity of 100 kN each
• Flexure span is adjustable
• Flexure test for 3 or 4 point
• Hydraulic System
• Supplied with 2 deformation measurement systems.
Concrete Pipe Testing Machine - 0210
Concrete Pipe Testing Machine - 0210
Ref. Standard : EN 1916
EKE 0210:
Concrete Pipe Testing Machine , 400 kN Capacity without Carrying Chassis & with Standard Automatic Power Pack, Outer diameters from 200 mm to 2000 mm .
EKE 0210: Concrete Pipe Testing Machine is specially designed for Crushing Tests on Sewer and Drain Pipes, Concrete Pipes, Fittings, Cones according to EN 1916. This model can be used for pipes with a length of up to 2000 mm
The Concrete Pipe Testing Machines are consisting of a frame and a hydraulic power pack. The frames are rigid 2 column constructions with superior axial and lateral stiffness and are precision aligned. Integrated in the crosshead is a double acting actuator is servo – controlled. The actuator has anti – rotation system to prevent the natural tendency of the actuator to rotate. The stroke of the double acting actuator is 300 mm. Load cell is used for precise load measurement and closed loop control.
The rectangular shaped top bearer is detachable from the actuator and the bottom bearer is V- shaped with an angle of 150°. During pipe loading the system permits top bearer to rotate 360° at horizontal plane and allows it to move at vertical plane of a minimum value of ± 8°. As an option 3- and 4- point bending accessories are available. Upper crosshead height adjustment is done with electric motor drive for easy and precise test set up and manual through locking pins are used to fix upper crosshead.
EKE 0210 option is including metal carrying chassis for the machine . The carrying chassis is supplied with V Shaped bottom bearer fixed directly on the chassis.
There are also two options are available for power pack. The machine can be supplied with standard automatic Power Pack, dual stage, controlled by TFT Graphical Display or Advanced Automatic Power Pack with Proportional Valve.
Concrete Pipe Testing Machine - 0206
Concrete Pipe Testing Machine - 0206
Ref. Standard : EN 1916
EKE 0206-:
Concrete Pipe Testing Machine , 1000 kN Capacity without Carrying Chassis & with Standard Automatic Power Pack, Max. Outer Dia. 3700 mm.
EKE 0206: Concrete Pipe Testing Machine is specially designed for Crushing Tests on Sewer and Drain Pipes, Concrete Pipes, Fittings, Cones according to EN 1916. This model can be used for pipes with a length of up to 3000 mm
The Concrete Pipe Testing Machines are consisting of a frame and a hydraulic power pack. The frames are rigid 2 column constructions with superior axial and lateral stiffness and are precision aligned. Integrated in the crosshead is a double acting actuator is servo – controlled. The actuator has anti – rotation system to prevent the natural tendency of the actuator to rotate. The stroke of the double acting actuator is 300 mm. Load cell is used for precise load measurement and closed loop control.
The rectangular shaped top bearer is detachable from the actuator and the bottom bearer is V- shaped with an angle of 150°. During pipe loading the system permits top bearer to rotate 360° at horizontal plane and allows it to move at vertical plane of a minimum value of ± 8°. As an option 3- and 4- point bending accessories are available. Upper crosshead height adjustment is done with electric motor drive for easy and precise test set up and manual through locking pins are used to fix upper crosshead.
EKE 0206 option is including metal carrying chassis for the machine . The carrying chassis is supplied with V Shaped bottom bearer fixed directly on the chassis.
There are also two options are available for power pack. The machine can be supplied with standard automatic Power Pack, dual stage, controlled by TFT Graphical Display or Advanced Automatic Power Pack with Proportional Valve.
Concrete Pipe Testing Machine - 0209
Concrete Pipe Testing Machine - 0209
Ref. Standard : EN 1916
EKE 0209-:
Concrete Pipe Testing Machine , 400 kN Capacity without Carrying Chassis & with Standard Automatic Power Pack, Outer diameters from 200 mm to 2000 mm .
EKE 0209 Concrete Pipe Testing Machine is specially designed for Crushing Tests on Sewer and Drain Pipes, Concrete Pipes, Fittings, Cones according to EN 1916. This model can be used for pipes with a length of up to 2000 mm
The Concrete Pipe Testing Machines are consisting of a frame and a hydraulic power pack. The frames are rigid 2 column constructions with superior axial and lateral stiffness and are precision aligned. Integrated in the crosshead is a double acting actuator is servo – controlled. The actuator has anti – rotation system to prevent the natural tendency of the actuator to rotate. The stroke of the double acting actuator is 300 mm. Load cell is used for precise load measurement and closed loop control.
The rectangular shaped top bearer is detachable from the actuator and the bottom bearer is V- shaped with an angle of 150°. During pipe loading the system permits top bearer to rotate 360° at horizontal plane and allows it to move at vertical plane of a minimum value of ± 8°. As an option 3- and 4- point bending accessories are available. Upper crosshead height adjustment is done with electric motor drive for easy and precise test set up and manual through locking pins are used to fix upper crosshead.
EKE 0209: option is including metal carrying chassis for the machine . The carrying chassis is supplied with V Shaped bottom bearer fixed directly on the chassis.
There are also two options are available for power pack. The machine can be supplied with standard automatic Power Pack, dual stage, controlled by TFT Graphical Display or Advanced Automatic Power Pack with Proportional Valve.
Concrete Pipe Testing Machine - 0204
Concrete Pipe Testing Machine - 0204
Ref. Standard : EN 1916
EKE 0204:
Concrete Pipe Testing Machine , 1000 kN Capacity without Carrying Chassis & with Standard Automatic Power Pack, Max. Outer Dia. 3700 mm.
EKE 0204 Concrete Pipe Testing Machine is specially designed for Crushing Tests on Sewer and Drain Pipes, Concrete Pipes, Fittings, Cones according to EN 1916. This model can be used for pipes with a length of up to 3000 mm
The Concrete Pipe Testing Machines are consisting of a frame and a hydraulic power pack. The frames are rigid 2 column constructions with superior axial and lateral stiffness and are precision aligned. Integrated in the crosshead is a double acting actuator is servo – controlled. The actuator has anti – rotation system to prevent the natural tendency of the actuator to rotate. The stroke of the double acting actuator is 300 mm. Load cell is used for precise load measurement and closed loop control.
The rectangular shaped top bearer is detachable from the actuator and the bottom bearer is V- shaped with an angle of 150°. During pipe loading the system permits top bearer to rotate 360° at horizontal plane and allows it to move at vertical plane of a minimum value of ± 8°. As an option 3- and 4- point bending accessories are available. Upper crosshead height adjustment is done with electric motor drive for easy and precise test set up and manual through locking pins are used to fix upper crosshead.
EKE 0204 option is not including carrying chassis for the machine . These types of frames have to be anchored to concrete base. All required parts to anchor the frame to the concrete base is supplied. The frame without carrying chassis is supplied with V Shaped bottom bearers which can be anchored to concrete base.
There are also two options are available for power pack. The machine can be supplied with standard automatic Power Pack, dual stage, controlled by TFT Graphical Display or Advanced Automatic Power Pack with Proportional Valve.
Concrete Pipe Testing Machine - 0202
Concrete Pipe Testing Machine - 0202
Ref. Standard : EN 1916
EKE 0202:
Concrete Pipe Testing Machine , 1000 kN Capacity without Carrying Chassis & with Standard Automatic Power Pack, Max. Outer Dia. 3700 mm.
EKE 0202 Concrete Pipe Testing Machine is specially designed for Crushing Tests on Sewer and Drain Pipes, Concrete Pipes, Fittings, Cones according to EN 1916. This model can be used for pipes with a length of up to 3000 mm
The Concrete Pipe Testing Machines are consisting of a frame and a hydraulic power pack. The frames are rigid 2 column constructions with superior axial and lateral stiffness and are precision aligned. Integrated in the crosshead is a double acting actuator is servo – controlled. The actuator has anti – rotation system to prevent the natural tendency of the actuator to rotate. The stroke of the double acting actuator is 300 mm. Load cell is used for precise load measurement and closed loop control.
The rectangular shaped top bearer is detachable from the actuator and the bottom bearer is V- shaped with an angle of 150°. During pipe loading the system permits top bearer to rotate 360° at horizontal plane and allows it to move at vertical plane of a minimum value of ± 8°. As an option 3- and 4- point bending accessories are available. Upper crosshead height adjustment is done with electric motor drive for easy and precise test set up and manual through locking pins are used to fix upper crosshead.
EKE 0202 option is including metal carrying chassis for the machine . The carrying chassis is supplied with V Shaped bottom bearer fixed directly on the chassis.
There are also two options are available for power pack. The machine can be supplied with standard automatic Power Pack, dual stage, controlled by TFT Graphical Display or Advanced Automatic Power Pack with Proportional Valve.
Concrete Pipe Testing Machine - 0200
Concrete Pipe Testing Machine - 0200
Ref. Standard : EN 1916
EKE 0200:
Concrete Pipe Testing Machine , 1000 kN Capacity without Carrying Chassis & with Standard Automatic Power Pack, Max. Outer Dia. 3700 mm.
EKE 0200 Concrete Pipe Testing Machine is specially designed for Crushing Tests on Sewer and Drain Pipes, Concrete Pipes, Fittings, Cones according to EN 1916. This model can be used for pipes with a length of up to 3000 mm
The Concrete Pipe Testing Machines are consisting of a frame and a hydraulic power pack. The frames are rigid 2 column constructions with superior axial and lateral stiffness and are precision aligned. Integrated in the crosshead is a double acting actuator is servo – controlled. The actuator has anti – rotation system to prevent the natural tendency of the actuator to rotate. The stroke of the double acting actuator is 300 mm. Load cell is used for precise load measurement and closed loop control.
The rectangular shaped top bearer is detachable from the actuator and the bottom bearer is V- shaped with an angle of 150°. During pipe loading the system permits top bearer to rotate 360° at horizontal plane and allows it to move at vertical plane of a minimum value of ± 8°. As an option 3- and 4- point bending accessories are available. Upper crosshead height adjustment is done with electric motor drive for easy and precise test set up and manual through locking pins are used to fix upper crosshead.
EKE 0200 option is not including carrying chassis for the machine . These types of frames have to be anchored to concrete base. All required parts to anchor the frame to the concrete base is supplied. The frame without carrying chassis is supplied with V Shaped bottom bearers which can be anchored to concrete base.
There are also two options are available for power pack. The machine can be supplied with standard automatic Power Pack, dual stage, controlled by TFT Graphical Display or Advanced Automatic Power Pack with Proportional Valve.
Concrete Pipe Testing Machine - 0196
Concrete Pipe Testing Machine - 0196
Ref. Standard : EN 1916
EKE 0196:
Concrete Pipe Testing Machine , 1000 kN Capacity without Carrying Chassis & with Standard Automatic Power Pack, Max. Outer Dia. 2900 mm.
EKE 0196 Concrete Pipe Testing Machine is specially designed for Crushing Tests on Sewer and Drain Pipes, Concrete Pipes, Fittings, Cones according to EN 1916. This model can be used for pipes with a length of up to 3000 mm
The Concrete Pipe Testing Machines are consisting of a frame and a hydraulic power pack. The frames are rigid 2 column constructions with superior axial and lateral stiffness and are precision aligned. Integrated in the crosshead is a double acting actuator is servo – controlled. The actuator has anti – rotation system to prevent the natural tendency of the actuator to rotate. The stroke of the double acting actuator is 300 mm. Load cell is used for precise load measurement and closed loop control.
The rectangular shaped top bearer is detachable from the actuator and the bottom bearer is V- shaped with an angle of 150°. During pipe loading the system permits top bearer to rotate 360° at horizontal plane and allows it to move at vertical plane of a minimum value of ± 8°. As an option 3- and 4- point bending accessories are available. Upper crosshead height adjustment is done with electric motor drive for easy and precise test set up and manual through locking pins are used to fix upper crosshead.
Concrete Pipe Testing Machine - 0194
Concrete Pipe Testing Machine - 0194
Ref. Standard : EN 1916
EKE 0194:
Concrete Pipe Testing Machine , 1000 kN Capacity without Carrying Chassis & with Standard Automatic Power Pack, Max. Outer Dia. 2900 mm.
EKE 0194 Concrete Pipe Testing Machine is specially designed for Crushing Tests on Sewer and Drain Pipes, Concrete Pipes, Fittings, Cones according to EN 1916. This model can be used for pipes with a length of up to 3000 mm
The Concrete Pipe Testing Machines are consisting of a frame and a hydraulic power pack. The frames are rigid 2 column constructions with superior axial and lateral stiffness and are precision aligned. Integrated in the crosshead is a double acting actuator is servo – controlled. The actuator has anti – rotation system to prevent the natural tendency of the actuator to rotate. The stroke of the double acting actuator is 300 mm. Load cell is used for precise load measurement and closed loop control.
The rectangular shaped top bearer is detachable from the actuator and the bottom bearer is V- shaped with an angle of 150°. During pipe loading the system permits top bearer to rotate 360° at horizontal plane and allows it to move at vertical plane of a minimum value of ± 8°. As an option 3- and 4- point bending accessories are available. Upper crosshead height adjustment is done with electric motor drive for easy and precise test set up and manual through locking pins are used to fix upper crosshead.
Concrete Pipe Testing Machine - 0192
Concrete Pipe Testing Machine - 0192
Ref. Standard : EN 1916
EKE 0192:
Concrete Pipe Testing Machine , 1000 kN Capacity without Carrying Chassis & with Standard Automatic Power Pack, Max. Outer Dia. 2900 mm.
EKE 0192 Concrete Pipe Testing Machine is specially designed for Crushing Tests on Sewer and Drain Pipes, Concrete Pipes, Fittings, Cones according to EN 1916. This model can be used for pipes with a length of up to 3000 mm
The Concrete Pipe Testing Machines are consisting of a frame and a hydraulic power pack. The frames are rigid 2 column constructions with superior axial and lateral stiffness and are precision aligned. Integrated in the crosshead is a double acting actuator is servo – controlled. The actuator has anti – rotation system to prevent the natural tendency of the actuator to rotate. The stroke of the double acting actuator is 300 mm. Load cell is used for precise load measurement and closed loop control.
The rectangular shaped top bearer is detachable from the actuator and the bottom bearer is V- shaped with an angle of 150°. During pipe loading the system permits top bearer to rotate 360° at horizontal plane and allows it to move at vertical plane of a minimum value of ± 8°. As an option 3- and 4- point bending accessories are available. Upper crosshead height adjustment is done with electric motor drive for easy and precise test set up and manual through locking pins are used to fix upper crosshead.
Concrete Pipe Testing Machine - 0190
Concrete Pipe Testing Machine - 0190
Ref. Standard : EN 1916
EKE 0190:
Concrete Pipe Testing Machine , 1000 kN Capacity without Carrying Chassis & with Standard Automatic Power Pack, Max. Outer Dia. 2900 mm.
EKE 0190 Concrete Pipe Testing Machine is specially designed for Crushing Tests on Sewer and Drain Pipes, Concrete Pipes, Fittings, Cones according to EN 1916. This model can be used for pipes with a length of up to 3000 mm
The Concrete Pipe Testing Machines are consisting of a frame and a hydraulic power pack. The frames are rigid 2 column constructions with superior axial and lateral stiffness and are precision aligned. Integrated in the crosshead is a double acting actuator is servo – controlled. The actuator has anti – rotation system to prevent the natural tendency of the actuator to rotate. The stroke of the double acting actuator is 300 mm. Load cell is used for precise load measurement and closed loop control.
The rectangular shaped top bearer is detachable from the actuator and the bottom bearer is V- shaped with an angle of 150°. During pipe loading the system permits top bearer to rotate 360° at horizontal plane and allows it to move at vertical plane of a minimum value of ± 8°. As an option 3- and 4- point bending accessories are available. Upper crosshead height adjustment is done with electric motor drive for easy and precise test set up and manual through locking pins are used to fix upper crosshead.
