SERVOPLEX MACHINE

Servoplex Machine With Servo Motor and LCD Control  System (Only Frame) , 50 kN

EKE 0107:

EKE 0870: CBR Penetration Piston , used to perform CBR tests
EKE 0115: Compression Platens, used to perform uniaxial and unconfined compression tests
EKE 0057: Breaking Head Stability Mould, Cast Iron, for 4” (101.6 mm) Marshall Samples
EKE 0058: Breaking Head Stability Mould, Cast Iron, for 6” (152.4 mm) Marshall Samples

SERVOPLEX Machine is used to make Uniaxial , CBR and Marshall Tests. 50 kN capacity SERVOPLEX Machine is equipped with a servo motor and LCD graphics control system and capable of doing test with the speed range of 0.00001 mm/min to 51 mm/min suitable for CBR, Marshall, Triaxial and Uniaxial Tests.

For analog measurement the frame can be completed with load ring and dial gauge . Load ring and dial gauge should be ordered separately.

If the machine will be used with a data logger , unilogger (EKE-0325), Load cell  and displacement transducers should be ordered to complete the testing machine.

The test such as Uniaxial , Triaxial, Marshall and CBR can be performed with the EKE 01107 by adding the test accessories.

Test accessories should be ordered separately according to the tests.

-    Test Speed : 0.00001-51 mm/min.
-    Capacity : 50 kN
-    Dimensions : 550 x 700 x 1200 mm
-     Weight (approx.) 102 kg

Load Cells – 5 kN Capacity , S Type

EKE 0010:

A Load Cell is a transducer which is used to convert the applied force to electric signal. ENKAY supplies high quality strain gauge load cells which provide accurate electrical signal proportional to the applied load. 

Linear Potentiometric Displacement Transducer , Travel 25 mm, Nominal Resistance 1kΩ
 
EKE 0062:

Linear Potentiometric Displacement Transducer provides an electric signal proportional to the linear shaft displacement. ENKAY supplies high quality Linear Potentiometric Displacement Transducers  10 mm  travel range for precise and accurate linear displacement measure

Block With One Connection Line for Triaxial Test

EKE 0405:

The pressure Transducer is used for the measurement of cell or back or pore pressure of water in triaxial test systems and also should be used with a ENKAY Ek.EC 100 TFT Unit (EKE-4390) or  datalogger (EKE 0320). The Block for Triaxial test cells are used for connection of the pressure transducers and de- airing in the water hoses.

Block with Three Connection Lines for Triaxial Test

EKE 0406:

The pressure Transducer is used for the measurement of cell or back or pore pressure of water in triaxial test systems and also should be used with a ENKAY EK.EC 100 TFT Unit (EKE-4390) or  datalogger (EKE 0320). The Block for Triaxial test cells are used for connection of the pressure transducers and de- airing in the water hoses

Pressure Transducer, 2000 kPa

EKE 0110:

The pressure Transducer is used for the measurement of cell or back or pore pressure of water in triaxial test systems and also should be used with a ENKAY Ek.EC 100 TFT Unit (EKE-4390) or  datalogger (EKE 0320). The Block for Triaxial test cells are used for connection of the pressure transducers and de- airing in the water hoses. 

Automatic Oil and Water Constant Pressure System

EKE 0408:

EKE 0408: Oil and Water Constant  Pressure Unit, 1700 kPa 220-240 V, 50-60 Hz, 1 Ph
EKE 0409: Digital Pressure Gauge , 1700 kPa (250 psi)
EKE 0110: Pressure Transducer , 2000 kPa

The oil and Water Constant  Pressure Unit is extremely versatile and can be used in conjunction with a wide range of test equipment. The unit provides continuous variable pressure up to 1700 kPa. Pressure is increased or decreased simply by turning a control wheel

The unit is used for providing cell/back pressure in triaxial tests. The apparatus is supplied without a gauge for those customers who have suitable pressure monitoring equipment.

As optional equipment for  monitoring the pressure of the unit;

•    The digital pressure Gauge (EKE 0409 or 
•    The pressure transducer (EKE 0110) which can be used with ENKAY EK.EC 100 TFT Unit on the Servoplex Universal Electromechanic       Test Machine (EKE 0108 for only UU test or
•    The pressure transducer (EKE 0110) which should be used with the datalogger (EKE 0320) for CU-CD tests

Can be used and preferred optional equipment should be ordered separately

The machine features a clear hydraulic/water interface reservoir and up to 1 litter capacity of water is available under pressure, supplied complete with 2 litters of No.46 regular hydraulic oil.

EKE 0408:
Dimension : 300 x 250 x 250 mm
Weight : (Approx.) : 7.5 kg  
Power : 35 W
EKE 0409
Dimension : 150 x 150 x 100 mm
Weight : (Approx.) : 0.6 kg  
Power : --

Automatic Volume Change Measurement

 EKE 0415:

The unit consists of a piston connected to a 25 mm travel linear transducer which is sealed against a precision machined calibration chamber so that the linear movement of the piston is exactly proportional to the volume of water in the calibration chamber.
The apparatus creates an electrical signal proportional to the volume of water flowing through the unit. By connecting it to the data acquisition system the measured volume change will be used by software during the test and in final report.
Capacity : 100cm²
Transducer Input : Up to 12 V DC
Accuracy : ± 0.1 ml
Dimension : 260 x 260 x 400 mm
Weight : (Approx.) : 5 kg  

Static Unilogger, 4 Channel Data Acquisition Unit 4 Channel

EKE 0320:

Static Unilogger, is a sophisticated data acquisition unit which provides the link between and the transducers connected to the test equipments.

EKE 0320 Static Unilogger is used for triaxial and consolidation tests or for general data collecting purpose

The main characteristics of EKE 0320 are :
•    4 Channel EKE 0320
•    High resolution : 16M points (effective 260, 000 points)
•    Large permanent memory
•    Ethernet port for PC Connection
•    CPU card by microprocessor 32 bit ARM risk architecture 
•    10 (samples/sec) / channel
•    24 bit A/D Converter  (effective 260, 000 divisions)
•    Digital gain selection, suitable for potentiometric transducers)
•    mv/V Sensors (Pressure transducers, Load Cells, Linear Transducers)
•    4 Mb memory

Unit TFT Graphic Display Data Acquisition and Control Unit

EK. CC. 100:

EK. CC 100 TFT Graphic Display Data Acquisition and Control Unit is designed to control the machine and processing of data from load cells, pressure transducers or displacement transducers which are fitted to machine

All the operations of EK.CC 100 are controlled from the front panel consisting of a 800 x 480 pixel 65535 color resistive touch screen display and function keys. 4 analogue channels (it would be simultaneous or not depending on the application at the factory) are provided for load – cells pressure transducers or displacement transducers.

EK.CC 100 has easy to use options. It displays all menu option listings  simultaneously , allowing the operator to access the required option in a seamless manner to active the option or enter a numeric valve to set the test parameters. The EK.EC100 digital graphic display is able to draw real-time “Load vs. Displacement” or “Stress vs. Time” Graphics.

EK.EC 100 unit offers many addition unique features. You can save more than 10000 test results in its memory. EK.EC 100 unit has support for various off-the-Shelf USB printers, supporting both inkjet and laser printers. Thanks to its built-in internet protocol suite, every aspect of EK.CC 100 device can be controlled remotely from anywhere around the world.

Features:
•    Can make test with displacement or load control
•    Real time display of test graph
•    CPU card with 32-bit ARM RISC architecture 
•    One analog channel for high capacity load cell , one analog channel for low capacity load cell, one analog channel for displacement transducer and one analog channel for cell pressure (only for UU tests)
•    Programmable digital gain adjustment for load – cell, pressure transducers, strain – gauge based sensors, potentiometric sensors, voltage and current transmitters
•    1/256000 points resolution per channel
•    10 data per second sample rate for each channel
•    Ethernet connecting for computer interface
•    800 x 480 resolution 65535 color TFT-LCD industrial touch screen
•    4 main function keys
•    Multi – language support
•    3 different system selection ; kN, Ton and ibf
•    Real – time clock and date
•    Test result visualization and memory management interface
•    Remote connection through Ethernet
•    USB flash disc for importing test results and for firmware
•    USB printer support for inkjet and laser printers (ask for models)
•    Camera support for real – time video recording during test (ask for compatible models)
•     Free of charge PC software for the test control and advanced report generation