(HYDRAULIC) (CLOSED HEAD DESIGN) (MECHANICAL DIAL TYPE) (SINGLE ACTING RAM)

Universal Testing Machine (Hydraulic)  Mechanical Version  
Conforms to Grade A of BS: 1610, Grade 1.0 IS:1828

EKE UT-10:

Universal Testing Machine is designed for testing  metals and other materials under Tension, Compression, Bending, Transverse and Shear Loads. Hardness test on metals can also be conducted.

Principle of Operation:
Operation of the machine by hydraulic transmission of load from the test specimen to a separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife – edges, which are prone to wear out and damage due to shock on rupture of test pieces.

Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted  to the cylinder of the pendulum dynamometer system housed in the control panel. The cylinder of the dynamometer is also of self-lubricating design. The load transmitted to the cylinder of the dynamometer is transferred through a lever system to a pendulum. Displacement of pendulum actuates the rack and pinion mechanism  which operates the load indicator pointer and the autographic recorder. The deflection of the pendulum represents the absolute load applied on the test specimen.

Return movement of the pendulum effectively damped to absorb energy in the sudden breakage of specimen.

The machine consists of :

Starting Unit:
This consists of a hydraulic cylinder, motor with chain and sprocket drive and a table coupled with the ram of the hydraulic cylinder, mounted on a robust base. The cylinder and the ram are individually lapped to eliminate friction. The upper cross – head is rigidly fixed to the table by two straight columns. The lower  cross- head is connected to two screwed columns which are driven by a motor. Axial loading of the ram is ensured by relieving the cylinder and ram of any possible side loading by the provision of ball seating’s.

An elongation scale, with a minimum graduation of 1 mm, is provided to measure the deformation of the specimen.

Tension test is conducted by gripping the test specimen between the upper and lower cross-head, Compression, Transverse, bending, shear and   hardness tests are conducted between the lower cross-head and the table.

The lower cross – head can be raised or lowered rapidly by operating the screwed columns, thus facilitating ease of fixing of the test specimen.

Control Panel:
The Control Panel consists of a power pack complete with drive motor and an oil tank, control valves, a pendulum dynamometer , a load indicating system and an autographic recorder.

Power Pack:
The Power Pack generates the maximum pressure of 200 kgf/cm². the hydraulic pump provides continuously non-pulsating oil flow making the load application very smooth.

Hydraulic Controls:
Hand operated wheels are used to control the flow to and from the hydraulic cylinder. The regulation of oil flow is infinitely variable. Incorporated in the hydraulic system is a regulating valve, which maintains a practically constant rate of piston movement.

Load Indicator System:
This system consists of a large dial and a pointer. A dummy pointer is provided to register the maximum load reached during the test. Different measuring ranges can be selected by changing relevant weights on the pendulum and operating the range selection knob. An overload trip switch is incorporated which automatically EKE out the pump motor when the load range is use is exceeded 

Pendulum Dynamometer:
The unit permits selection of favorable hydraulic rations producing relatively  small frictional forces. Pressurized oil in the loading cylinder pushes up the measuring piston proportionately and actuates the special dynamometer system. The piston is constantly rotated to eliminate frication. The dynamometer system is also provided with an integral damper and ensures high reliability of operation. The load transmitted to the dynamometer is transferred through a pendulum to the load indicator.
       
Autographic Continuous Roll Load – Elongation Recorder:
This unit is of the pen and drum  and is supplied as a part of standard supply. The horizontal motion of the pen produces the load co-ordinate of the diagram and the drum rotation produces the extension co-ordinate , in the ration of either 1:5 or 1:10.

A continuous roll of graph paper is stored inside the drum and is easily replaced.

Accuracy and Calibration:
All Universal Testing Machines are closely controlled for sensitivity, accuracy and calibration during every stage of manufacture. Every machine is then calibrated over each of its measuring ranges in accordance with the procedure laid down in British Standards 1610:1964 and IS:1828 & BS 1610
Conforms to Grade A of BS: 1610, Grade 1.0 IS:1828
•    Loading accuracy as high as ± 1%
•    Starting at variable speeds to suit a wide range of materials
•    Motor driven threaded columns for quick effortless adjustment of lower cross – head to facilitate rapid fixing of test specimen.
•    Continuous roll autographic recorder supplied as standard to enable study of the behiavior of materials.
•    High reading accuracy due to large size and design of dial
•    Large effective clearance between columns enables testing of standard specimens as well as structures.

Specifications:
•    Maximum Capacity (Tonne) : 10
•    1st  Measuring Range (Tonne)  : 0-10
•    Minimum Graduations (kgf) : 20
•    2nd   Measuring Range (Tonne)  : 0-5
•    Minimum Graduations (kgf) : 10
•    3rd  Measuring Range (Tonne)  :0-2.5
•    Minimum Graduations (kgf) : 5
•    4th  Measuring Range (Tonne)  : 0-1
•    Minimum Graduations (kgf) : 2
•    Ram Stroke (mm) : 150
•    Straining / Piston Speeds  (mm/min) (at no load): 0-300

Controlled Load
•    HP : 1.5
•    V : 400-400
•    Φ: 3

Standard Accessories:

For Tension Test :
•    Clamping Jaws for Testing Round Specimens under Tension
•    Clamping Jaws for Testing Flat Specimens under Tension

For Compression Test:
A pair of compression platens, duly hardened , ground and polished with bottom platen provided with guide lines for placing the test specimen co-axial with the hydraulic ram.

For Bending / Transverse Test:
Table with adjustable Rollers complete with Mandrel for conducting Bending/Transverse Tests

Optional Accessories:
The Universal Testing Machine is made versatile and utility oriented for carrying out a number of other tests as well with Accessories/Attachments that are Optional

These Optional Accessories/Attachments are priced nominally and are quite indispensable especially for Technical Institutions

Features:
•    Load Stabilizer
•    Brinell Hardness Test Attachment 
•    Double Shear Test Attachment : Small & Large
•    180° Bend Test Attachment
•    Bare Attachment
•    Bushes for Testing Threaded Specimens
•    Bushes for Testing Controlled Specimens
•    Attachment t for Testing Wire & Manila Ropes
•    Extensometers : Mechanical/Electronic with Fixed & Variable Gauge Length
•    Flexure Testing Attachments

Universal Testing Machine (Hydraulic)  Mechanical Version - 20 
Conforms to Grade A of BS: 1610, Grade 1.0 IS:1828

EKE UT-20:

Universal Testing Machine is designed for testing  metals and other materials under Tension, Compression, Bending, Transverse and Shear Loads. Hardness test on metals can also be conducted.

Principle of Operation:
Operation of the machine by hydraulic transmission of load from the test specimen to a separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife – edges, which are prone to wear out and damage due to shock on rupture of test pieces.

Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted  to the cylinder of the pendulum dynamometer system housed in the control panel. The cylinder of the dynamometer is also of self-lubricating design. The load transmitted to the cylinder of the dynamometer is transferred through a lever system to a pendulum. Displacement of pendulum actuates the rack and pinion mechanism  which operates the load indicator pointer and the autographic recorder. The deflection of the pendulum represents the absolute load applied on the test specimen.

Return movement of the pendulum effectively damped to absorb energy in the sudden breakage of specimen.

The machine consists of :

Starting Unit:
This consists of a hydraulic cylinder, motor with chain and sprocket drive and a table coupled with the ram of the hydraulic cylinder, mounted on a robust base. The cylinder and the ram are individually lapped to eliminate friction. The upper cross – head is rigidly fixed to the table by two straight columns. The lower  cross- head is connected to two screwed columns which are driven by a motor. Axial loading of the ram is ensured by relieving the cylinder and ram of any possible side loading by the provision of ball seating’s.

An elongation scale, with a minimum graduation of 1 mm, is provided to measure the deformation of the specimen.

Tension test is conducted by gripping the test specimen between the upper and lower cross-head, Compression, Transverse, bending, shear and   hardness tests are conducted between the lower cross-head and the table.

The lower cross – head can be raised or lowered rapidly by operating the screwed columns, thus facilitating ease of fixing of the test specimen.

Control Panel:
The Control Panel consists of a power pack complete with drive motor and an oil tank, control valves, a pendulum dynamometer , a load indicating system and an autographic recorder.

Power Pack:
The Power Pack generates the maximum pressure of 200 kgf/cm². the hydraulic pump provides continuously non-pulsating oil flow making the load application very smooth.

Hydraulic Controls:
Hand operated wheels are used to control the flow to and from the hydraulic cylinder. The regulation of oil flow is infinitely variable. Incorporated in the hydraulic system is a regulating valve, which maintains a practically constant rate of piston movement.

Load Indicator System:
This system consists of a large dial and a pointer. A dummy pointer is provided to register the maximum load reached during the test. Different measuring ranges can be selected by changing relevant weights on the pendulum and operating the range selection knob. An overload trip switch is incorporated which automatically EKE out the pump motor when the load range is use is exceeded 

Pendulum Dynamometer:
The unit permits selection of favorable hydraulic rations producing relatively  small frictional forces. Pressurized oil in the loading cylinder pushes up the measuring piston proportionately and actuates the special dynamometer system. The piston is constantly rotated to eliminate frication. The dynamometer system is also provided with an integral damper and ensures high reliability of operation. The load transmitted to the dynamometer is transferred through a pendulum to the load indicator.
       
Autographic Continuous Roll Load – Elongation Recorder:
This unit is of the pen and drum  and is supplied as a part of standard supply. The horizontal motion of the pen produces the load co-ordinate of the diagram and the drum rotation produces the extension co-ordinate , in the ration of either 1:5 or 1:10.

A continuous roll of graph paper is stored inside the drum and is easily replaced.

Accuracy and Calibration:
All Universal Testing Machines are closely controlled for sensitivity, accuracy and calibration during every stage of manufacture. Every machine is then calibrated over each of its measuring ranges in accordance with the procedure laid down in British Standards 1610:1964 and IS:1828 & BS 1610
Conforms to Grade A of BS: 1610, Grade 1.0 IS:1828
•    Loading accuracy as high as ± 1%
•    Starting at variable speeds to suit a wide range of materials
•    Motor driven threaded columns for quick effortless adjustment of lower cross – head to facilitate rapid fixing of test specimen.
•    Continuous roll autographic recorder supplied as standard to enable study of the behiavior of materials.
•    High reading accuracy due to large size and design of dial
•    Large effective clearance between columns enables testing of standard specimens as well as structures.

Specifications :
•    Maximum Capacity (Tonne) : 20
•    1st  Measuring Range (Tonne)  : 0-20
•    Minimum Graduations (kgf) : 40
•    2nd   Measuring Range (Tonne)  : 0-10
•    Minimum Graduations (kgf) : 20
•    3rd  Measuring Range (Tonne)  : 0-5
•    Minimum Graduations (kgf) : 10
•    4th  Measuring Range (Tonne)  : 0-2
•    Minimum Graduations (kgf) : 4
•    Ram Stroke (mm) : 200
•    Straining / Piston Speeds  (mm/min) (at no load): 0-150

Controlled Load
•    HP : 1.5
•    V : 400-400
•    Φ: 3

Standard Accessories:

For Tension Test :
•    Clamping Jaws for Testing Round Specimens under Tension
•    Clamping Jaws for Testing Flat Specimens under Tension

For Compression Test:
A pair of compression platens, duly hardened , ground and polished with bottom platen provided with guide lines for placing the test specimen co-axial with the hydraulic ram.

For Bending / Transverse Test:
Table with adjustable Rollers complete with Mandrel for conducting Bending/Transverse Tests

Optional Accessories:
The Universal Testing Machine is made versatile and utility oriented for carrying out a number of other tests as well with Accessories/Attachments that are Optional

These Optional Accessories/Attachments are priced nominally and are quite indispensable especially for Technical Institutions

Features:
•    Load Stabilizer
•    Brinell Hardness Test Attachment 
•    Double Shear Test Attachment : Small & Large
•    180° Bend Test Attachment
•    Bare Attachment
•    Bushes for Testing Threaded Specimens
•    Bushes for Testing Controlled Specimens
•    Attachment t for Testing Wire & Manila Ropes
•    Extensometers : Mechanical/Electronic with Fixed & Variable Gauge Length
•    Flexure Testing Attachments

Universal Testing Machine (Hydraulic)  Mechanical Version -40 
Conforms to Grade A of BS: 1610, Grade 1.0 IS:1828

EKE UT-40:

Universal Testing Machine is designed for testing  metals and other materials under Tension, Compression, Bending, Transverse and Shear Loads. Hardness test on metals can also be conducted.

Principle of Operation:
Operation of the machine by hydraulic transmission of load from the test specimen to a separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife – edges, which are prone to wear out and damage due to shock on rupture of test pieces.

Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted  to the cylinder of the pendulum dynamometer system housed in the control panel. The cylinder of the dynamometer is also of self-lubricating design. The load transmitted to the cylinder of the dynamometer is transferred through a lever system to a pendulum. Displacement of pendulum actuates the rack and pinion mechanism  which operates the load indicator pointer and the autographic recorder. The deflection of the pendulum represents the absolute load applied on the test specimen.

Return movement of the pendulum effectively damped to absorb energy in the sudden breakage of specimen.

The machine consists of:

Starting Unit:
This consists of a hydraulic cylinder, motor with chain and sprocket drive and a table coupled with the ram of the hydraulic cylinder, mounted on a robust base. The cylinder and the ram are individually lapped to eliminate friction. The upper cross – head is rigidly fixed to the table by two straight columns. The lower  cross- head is connected to two screwed columns which are driven by a motor. Axial loading of the ram is ensured by relieving the cylinder and ram of any possible side loading by the provision of ball seating’s.

An elongation scale, with a minimum graduation of 1 mm, is provided to measure the deformation of the specimen.

Tension test is conducted by gripping the test specimen between the upper and lower cross-head, Compression, Transverse, bending, shear and   hardness tests are conducted between the lower cross-head and the table.

The lower cross – head can be raised or lowered rapidly by operating the screwed columns, thus facilitating ease of fixing of the test specimen.

Control Panel:
The Control Panel consists of a power pack complete with drive motor and an oil tank, control valves, a pendulum dynamometer , a load indicating system and an autographic recorder.

Power Pack:
The Power Pack generates the maximum pressure of 200 kgf/cm². the hydraulic pump provides continuously non-pulsating oil flow making the load application very smooth.

Hydraulic Controls:
Hand operated wheels are used to control the flow to and from the hydraulic cylinder. The regulation of oil flow is infinitely variable. Incorporated in the hydraulic system is a regulating valve, which maintains a practically constant rate of piston movement.

Load Indicator System:
This system consists of a large dial and a pointer. A dummy pointer is provided to register the maximum load reached during the test. Different measuring ranges can be selected by changing relevant weights on the pendulum and operating the range selection knob. An overload trip switch is incorporated which automatically EKE out the pump motor when the load range is use is exceeded 

Pendulum Dynamometer:
The unit permits selection of favorable hydraulic rations producing relatively  small frictional forces. Pressurized oil in the loading cylinder pushes up the measuring piston proportionately and actuates the special dynamometer system. The piston is constantly rotated to eliminate frication. The dynamometer system is also provided with an integral damper and ensures high reliability of operation. The load transmitted to the dynamometer is transferred through a pendulum to the load indicator.
       
Autographic Continuous Roll Load – Elongation Recorder:
This unit is of the pen and drum  and is supplied as a part of standard supply. The horizontal motion of the pen produces the load co-ordinate of the diagram and the drum rotation produces the extension co-ordinate , in the ration of either 1:5 or 1:10.

A continuous roll of graph paper is stored inside the drum and is easily replaced.

Accuracy and Calibration:
All Universal Testing Machines are closely controlled for sensitivity, accuracy and calibration during every stage of manufacture. Every machine is then calibrated over each of its measuring ranges in accordance with the procedure laid down in British Standards 1610:1964 and IS:1828 & BS 1610
Conforms to Grade A of BS: 1610, Grade 1.0 IS:1828
•    Loading accuracy as high as ± 1%
•    Starting at variable speeds to suit a wide range of materials
•    Motor driven threaded columns for quick effortless adjustment of lower cross – head to facilitate rapid fixing of test specimen.
•    Continuous roll autographic recorder supplied as standard to enable study of the behiavior of materials.
•    High reading accuracy due to large size and design of dial
•    Large effective clearance between columns enables testing of standard specimens as well as structures.

Specifications:
•    Maximum Capacity (Tonne) : 40
•    1st  Measuring Range (Tonne)  : 0-40
•    Minimum Graduations (kgf) : 80
•    2nd   Measuring Range (Tonne)  : 0-20
•    Minimum Graduations (kgf) : 40
•    3rd  Measuring Range (Tonne)  : 0-10
•    Minimum Graduations (kgf) : 20
•    4th  Measuring Range (Tonne)  : 0-4
•    Minimum Graduations (kgf) : 8
•    Ram Stroke (mm) : 200
•    Straining / Piston Speeds  (mm/min) (at no load): 0-150

Controlled Load
•    HP : 2.5
•    V : 400-400
•    Φ: 3

Standard Accessories:

For Tension Test :
•    Clamping Jaws for Testing Round Specimens under Tension
•    Clamping Jaws for Testing Flat Specimens under Tension

For Compression Test:
A pair of compression platens, duly hardened , ground and polished with bottom platen provided with guide lines for placing the test specimen co-axial with the hydraulic ram.

For Bending / Transverse Test:
Table with adjustable Rollers complete with Mandrel for conducting Bending/Transverse Tests

Optional Accessories:
The Universal Testing Machine is made versatile and utility oriented for carrying out a number of other tests as well with Accessories/Attachments that are Optional

These Optional Accessories/Attachments are priced nominally and are quite indispensable especially for Technical Institutions

Features:
•    Load Stabilizer
•    Brinell Hardness Test Attachment 
•    Double Shear Test Attachment : Small & Large
•    180° Bend Test Attachment
•    Bare Attachment
•    Bushes for Testing Threaded Specimens
•    Bushes for Testing Controlled Specimens
•    Attachment t for Testing Wire & Manila Ropes
•    Extensometers : Mechanical/Electronic with Fixed & Variable Gauge Length
•    Flexure Testing Attachments

Universal Testing Machine (Hydraulic)  Mechanical Version - 60 
Conforms to Grade A of BS: 1610, Grade 1.0 IS:1828

EKE UT-60:

Universal Testing Machine is designed for testing  metals and other materials under Tension, Compression, Bending, Transverse and Shear Loads. Hardness test on metals can also be conducted.

Principle of Operation:
Operation of the machine by hydraulic transmission of load from the test specimen to a separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife – edges, which are prone to wear out and damage due to shock on rupture of test pieces.

Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted  to the cylinder of the pendulum dynamometer system housed in the control panel. The cylinder of the dynamometer is also of self-lubricating design. The load transmitted to the cylinder of the dynamometer is transferred through a lever system to a pendulum. Displacement of pendulum actuates the rack and pinion mechanism  which operates the load indicator pointer and the autographic recorder. The deflection of the pendulum represents the absolute load applied on the test specimen.

Return movement of the pendulum effectively damped to absorb energy in the sudden breakage of specimen.

The machine consists of:

Starting Unit:
This consists of a hydraulic cylinder, motor with chain and sprocket drive and a table coupled with the ram of the hydraulic cylinder, mounted on a robust base. The cylinder and the ram are individually lapped to eliminate friction. The upper cross – head is rigidly fixed to the table by two straight columns. The lower  cross- head is connected to two screwed columns which are driven by a motor. Axial loading of the ram is ensured by relieving the cylinder and ram of any possible side loading by the provision of ball seating’s.

An elongation scale, with a minimum graduation of 1 mm, is provided to measure the deformation of the specimen.

Tension test is conducted by gripping the test specimen between the upper and lower cross-head, Compression, Transverse, bending, shear and   hardness tests are conducted between the lower cross-head and the table.

The lower cross – head can be raised or lowered rapidly by operating the screwed columns, thus facilitating ease of fixing of the test specimen.

Control Panel:
The Control Panel consists of a power pack complete with drive motor and an oil tank, control valves, a pendulum dynamometer , a load indicating system and an autographic recorder.

Power Pack:
The Power Pack generates the maximum pressure of 200 kgf/cm². the hydraulic pump provides continuously non-pulsating oil flow making the load application very smooth.

Hydraulic Controls:
Hand operated wheels are used to control the flow to and from the hydraulic cylinder. The regulation of oil flow is infinitely variable. Incorporated in the hydraulic system is a regulating valve, which maintains a practically constant rate of piston movement.

Load Indicator System:
This system consists of a large dial and a pointer. A dummy pointer is provided to register the maximum load reached during the test. Different measuring ranges can be selected by changing relevant weights on the pendulum and operating the range selection knob. An overload trip switch is incorporated which automatically EKE out the pump motor when the load range is use is exceeded 

Pendulum Dynamometer:
The unit permits selection of favorable hydraulic rations producing relatively  small frictional forces. Pressurized oil in the loading cylinder pushes up the measuring piston proportionately and actuates the special dynamometer system. The piston is constantly rotated to eliminate frication. The dynamometer system is also provided with an integral damper and ensures high reliability of operation. The load transmitted to the dynamometer is transferred through a pendulum to the load indicator.
       
Autographic Continuous Roll Load – Elongation Recorder:
This unit is of the pen and drum  and is supplied as a part of standard supply. The horizontal motion of the pen produces the load co-ordinate of the diagram and the drum rotation produces the extension co-ordinate , in the ration of either 1:5 or 1:10.

A continuous roll of graph paper is stored inside the drum and is easily replaced.

Accuracy and Calibration:
All Universal Testing Machines are closely controlled for sensitivity, accuracy and calibration during every stage of manufacture. Every machine is then calibrated over each of its measuring ranges in accordance with the procedure laid down in British Standards 1610:1964 and IS:1828 & BS 1610
Conforms to Grade A of BS: 1610, Grade 1.0 IS:1828
•    Loading accuracy as high as ± 1%
•    Starting at variable speeds to suit a wide range of materials
•    Motor driven threaded columns for quick effortless adjustment of lower cross – head to facilitate rapid fixing of test specimen.
•    Continuous roll autographic recorder supplied as standard to enable study of the behiavior of materials.
•    High reading accuracy due to large size and design of dial
•    Large effective clearance between columns enables testing of standard specimens as well as structures.

Specifications:
•    Maximum Capacity (Tonne) : 60
•    1st  Measuring Range (Tonne)  : 0-60
•    Minimum Graduations (kgf) :100
•    2nd   Measuring Range (Tonne)  : 0-30
•    Minimum Graduations (kgf) : 50
•    3rd  Measuring Range (Tonne)  : 0-12
•    Minimum Graduations (kgf) : 20
•    4th  Measuring Range (Tonne)  :0-6
•    Minimum Graduations (kgf) : 10
•    Ram Stroke (mm) : 250
•    Straining / Piston Speeds  (mm/min) (at no load): 0-100

Controlled Load
•    HP : 2.5
•    V : 400-400
•    Φ: 3

Standard Accessories:

For Tension Test :
•    Clamping Jaws for Testing Round Specimens under Tension
•    Clamping Jaws for Testing Flat Specimens under Tension

For Compression Test:
A pair of compression platens, duly hardened , ground and polished with bottom platen provided with guide lines for placing the test specimen co-axial with the hydraulic ram.

For Bending / Transverse Test:
Table with adjustable Rollers complete with Mandrel for conducting Bending/Transverse Tests

Optional Accessories:
The Universal Testing Machine is made versatile and utility oriented for carrying out a number of other tests as well with Accessories/Attachments that are Optional

These Optional Accessories/Attachments are priced nominally and are quite indispensable especially for Technical Institutions

Features:
•    Load Stabilizer
•    Brinell Hardness Test Attachment 
•    Double Shear Test Attachment : Small & Large
•    180° Bend Test Attachment
•    Bare Attachment
•    Bushes for Testing Threaded Specimens
•    Bushes for Testing Controlled Specimens
•    Attachment t for Testing Wire & Manila Ropes
•    Extensometers : Mechanical/Electronic with Fixed & Variable Gauge Length
•    Flexure Testing Attachments

Universal Testing Machine (Hydraulic)  Mechanical Version-100  
Conforms to Grade A of BS: 1610, Grade 1.0 IS:1828

EKE UT-100:

Universal Testing Machine is designed for testing  metals and other materials under Tension, Compression, Bending, Transverse and Shear Loads. Hardness test on metals can also be conducted.

Principle of Operation:
Operation of the machine by hydraulic transmission of load from the test specimen to a separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife – edges, which are prone to wear out and damage due to shock on rupture of test pieces.

Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted  to the cylinder of the pendulum dynamometer system housed in the control panel. The cylinder of the dynamometer is also of self-lubricating design. The load transmitted to the cylinder of the dynamometer is transferred through a lever system to a pendulum. Displacement of pendulum actuates the rack and pinion mechanism  which operates the load indicator pointer and the autographic recorder. The deflection of the pendulum represents the absolute load applied on the test specimen.

Return movement of the pendulum effectively damped to absorb energy in the sudden breakage of specimen.

The machine consists of :

Starting Unit:
This consists of a hydraulic cylinder, motor with chain and sprocket drive and a table coupled with the ram of the hydraulic cylinder, mounted on a robust base. The cylinder and the ram are individually lapped to eliminate friction. The upper cross – head is rigidly fixed to the table by two straight columns. The lower  cross- head is connected to two screwed columns which are driven by a motor. Axial loading of the ram is ensured by relieving the cylinder and ram of any possible side loading by the provision of ball seating’s.

An elongation scale, with a minimum graduation of 1 mm, is provided to measure the deformation of the specimen.

Tension test is conducted by gripping the test specimen between the upper and lower cross-head, Compression, Transverse, bending, shear and   hardness tests are conducted between the lower cross-head and the table.

The lower cross – head can be raised or lowered rapidly by operating the screwed columns, thus facilitating ease of fixing of the test specimen.

Control Panel:
The Control Panel consists of a power pack complete with drive motor and an oil tank, control valves, a pendulum dynamometer , a load indicating system and an autographic recorder.

Power Pack:
The Power Pack generates the maximum pressure of 200 kgf/cm². the hydraulic pump provides continuously non-pulsating oil flow making the load application very smooth.

Hydraulic Controls:
Hand operated wheels are used to control the flow to and from the hydraulic cylinder. The regulation of oil flow is infinitely variable. Incorporated in the hydraulic system is a regulating valve, which maintains a practically constant rate of piston movement.

Load Indicator System:
This system consists of a large dial and a pointer. A dummy pointer is provided to register the maximum load reached during the test. Different measuring ranges can be selected by changing relevant weights on the pendulum and operating the range selection knob. An overload trip switch is incorporated which automatically EKE out the pump motor when the load range is use is exceeded 

Pendulum Dynamometer:
The unit permits selection of favorable hydraulic rations producing relatively  small frictional forces. Pressurized oil in the loading cylinder pushes up the measuring piston proportionately and actuates the special dynamometer system. The piston is constantly rotated to eliminate frication. The dynamometer system is also provided with an integral damper and ensures high reliability of operation. The load transmitted to the dynamometer is transferred through a pendulum to the load indicator.
       
Autographic Continuous Roll Load – Elongation Recorder:
This unit is of the pen and drum  and is supplied as a part of standard supply. The horizontal motion of the pen produces the load co-ordinate of the diagram and the drum rotation produces the extension co-ordinate , in the ration of either 1:5 or 1:10.

A continuous roll of graph paper is stored inside the drum and is easily replaced.

Accuracy and Calibration:
All Universal Testing Machines are closely controlled for sensitivity, accuracy and calibration during every stage of manufacture. Every machine is then calibrated over each of its measuring ranges in accordance with the procedure laid down in British Standards 1610:1964 and IS:1828 & BS 1610
Conforms to Grade A of BS: 1610, Grade 1.0 IS:1828
•    Loading accuracy as high as ± 1%
•    Starting at variable speeds to suit a wide range of materials
•    Motor driven threaded columns for quick effortless adjustment of lower cross – head to facilitate rapid fixing of test specimen.
•    Continuous roll autographic recorder supplied as standard to enable study of the behiavior of materials.
•    High reading accuracy due to large size and design of dial
•    Large effective clearance between columns enables testing of standard specimens as well as structures.

Specifications:
•    Maximum Capacity (Tonne) : 100
•    1st  Measuring Range (Tonne)  : 0-100
•    Minimum Graduations (kgf) : 200
•    2nd   Measuring Range (Tonne)  : 050
•    Minimum Graduations (kgf) : 100
•    3rd  Measuring Range (Tonne)  : 0-25
•    Minimum Graduations (kgf) : 50
•    4th  Measuring Range (Tonne)  : 0-10
•    Minimum Graduations (kgf) : 20
•    Ram Stroke (mm) : 250
•    Straining / Piston Speeds  (mm/min) (at no load): 0-80

Controlled Load
•    HP : 4
•    V : 400-400
•    Φ: 3

Standard Accessories:

For Tension Test :
•    Clamping Jaws for Testing Round Specimens under Tension
•    Clamping Jaws for Testing Flat Specimens under Tension

For Compression Test:
A pair of compression platens, duly hardened , ground and polished with bottom platen provided with guide lines for placing the test specimen co-axial with the hydraulic ram.

For Bending / Transverse Test:
Table with adjustable Rollers complete with Mandrel for conducting Bending/Transverse Tests

Optional Accessories:
The Universal Testing Machine is made versatile and utility oriented for carrying out a number of other tests as well with Accessories/Attachments that are Optional

These Optional Accessories/Attachments are priced nominally and are quite indispensable especially for Technical Institutions

Features:
•    Load Stabilizer
•    Brinell Hardness Test Attachment 
•    Double Shear Test Attachment : Small & Large
•    180° Bend Test Attachment
•    Bare Attachment
•    Bushes for Testing Threaded Specimens
•    Bushes for Testing Controlled Specimens
•    Attachment t for Testing Wire & Manila Ropes
•    Extensometers : Mechanical/Electronic with Fixed & Variable Gauge Length
•    Flexure Testing Attachments

Universal Testing Machine (Hydraulic)  Mechanical Version- 200  
Conforms to Grade A of BS: 1610, Grade 1.0 IS:1828

EKE UT-200:

Universal Testing Machine is designed for testing  metals and other materials under Tension, Compression, Bending, Transverse and Shear Loads. Hardness test on metals can also be conducted.

Principle of Operation:
Operation of the machine by hydraulic transmission of load from the test specimen to a separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife – edges, which are prone to wear out and damage due to shock on rupture of test pieces.

Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted  to the cylinder of the pendulum dynamometer system housed in the control panel. The cylinder of the dynamometer is also of self-lubricating design. The load transmitted to the cylinder of the dynamometer is transferred through a lever system to a pendulum. Displacement of pendulum actuates the rack and pinion mechanism  which operates the load indicator pointer and the autographic recorder. The deflection of the pendulum represents the absolute load applied on the test specimen.

Return movement of the pendulum effectively damped to absorb energy in the sudden breakage of specimen.

The machine consists of :

Starting Unit:
This consists of a hydraulic cylinder, motor with chain and sprocket drive and a table coupled with the ram of the hydraulic cylinder, mounted on a robust base. The cylinder and the ram are individually lapped to eliminate friction. The upper cross – head is rigidly fixed to the table by two straight columns. The lower  cross- head is connected to two screwed columns which are driven by a motor. Axial loading of the ram is ensured by relieving the cylinder and ram of any possible side loading by the provision of ball seating’s.

An elongation scale, with a minimum graduation of 1 mm, is provided to measure the deformation of the specimen.

Tension test is conducted by gripping the test specimen between the upper and lower cross-head, Compression, Transverse, bending, shear and   hardness tests are conducted between the lower cross-head and the table.

The lower cross – head can be raised or lowered rapidly by operating the screwed columns, thus facilitating ease of fixing of the test specimen.

Control Panel:
The Control Panel consists of a power pack complete with drive motor and an oil tank, control valves, a pendulum dynamometer , a load indicating system and an autographic recorder.

Power Pack:
The Power Pack generates the maximum pressure of 200 kgf/cm². the hydraulic pump provides continuously non-pulsating oil flow making the load application very smooth.

Hydraulic Controls:
Hand operated wheels are used to control the flow to and from the hydraulic cylinder. The regulation of oil flow is infinitely variable. Incorporated in the hydraulic system is a regulating valve, which maintains a practically constant rate of piston movement.

Load Indicator System:
This system consists of a large dial and a pointer. A dummy pointer is provided to register the maximum load reached during the test. Different measuring ranges can be selected by changing relevant weights on the pendulum and operating the range selection knob. An overload trip switch is incorporated which automatically EKE out the pump motor when the load range is use is exceeded 

Pendulum Dynamometer:
The unit permits selection of favorable hydraulic rations producing relatively  small frictional forces. Pressurized oil in the loading cylinder pushes up the measuring piston proportionately and actuates the special dynamometer system. The piston is constantly rotated to eliminate frication. The dynamometer system is also provided with an integral damper and ensures high reliability of operation. The load transmitted to the dynamometer is transferred through a pendulum to the load indicator.
       
Autographic Continuous Roll Load – Elongation Recorder:
This unit is of the pen and drum  and is supplied as a part of standard supply. The horizontal motion of the pen produces the load co-ordinate of the diagram and the drum rotation produces the extension co-ordinate , in the ration of either 1:5 or 1:10.

A continuous roll of graph paper is stored inside the drum and is easily replaced.

Accuracy and Calibration:
All Universal Testing Machines are closely controlled for sensitivity, accuracy and calibration during every stage of manufacture. Every machine is then calibrated over each of its measuring ranges in accordance with the procedure laid down in British Standards 1610:1964 and IS:1828 & BS 1610
Conforms to Grade A of BS: 1610, Grade 1.0 IS:1828
•    Loading accuracy as high as ± 1%
•    Starting at variable speeds to suit a wide range of materials
•    Motor driven threaded columns for quick effortless adjustment of lower cross – head to facilitate rapid fixing of test specimen.
•    Continuous roll autographic recorder supplied as standard to enable study of the behiavior of materials.
•    High reading accuracy due to large size and design of dial
•    Large effective clearance between columns enables testing of standard specimens as well as structures.

Specifications:
•    Maximum Capacity (Tonne) : 200
•    1st  Measuring Range (Tonne)  : 0-200
•    Minimum Graduations (kgf) :400
•    2nd   Measuring Range (Tonne)  : 0-100
•    Minimum Graduations (kgf) : 200
•    3rd  Measuring Range (Tonne)  : 0-50
•    Minimum Graduations (kgf) : 100
•    4th  Measuring Range (Tonne)  : 0-20
•    Minimum Graduations (kgf) : 40
•    Ram Stroke (mm) : 250
•    Straining / Piston Speeds  (mm/min) (at no load): 0-80

Controlled Load
•    HP : 7.5
•    V : 400-440
•    Φ: 3

Standard Accessories:

For Tension Test :
•    Clamping Jaws for Testing Round Specimens under Tension
•    Clamping Jaws for Testing Flat Specimens under Tension

For Compression Test:
A pair of compression platens, duly hardened , ground and polished with bottom platen provided with guide lines for placing the test specimen co-axial with the hydraulic ram.

For Bending / Transverse Test:
Table with adjustable Rollers complete with Mandrel for conducting Bending/Transverse Tests

Optional Accessories:
The Universal Testing Machine is made versatile and utility oriented for carrying out a number of other tests as well with Accessories/Attachments that are Optional

These Optional Accessories/Attachments are priced nominally and are quite indispensable especially for Technical Institutions

Features:
•    Load Stabilizer
•    Brinell Hardness Test Attachment 
•    Double Shear Test Attachment : Small & Large
•    180° Bend Test Attachment
•    Bare Attachment
•    Bushes for Testing Threaded Specimens
•    Bushes for Testing Controlled Specimens
•    Attachment t for Testing Wire & Manila Ropes
•    Extensometers : Mechanical/Electronic with Fixed & Variable Gauge Length
•    Flexure Testing Attachments

Universal Testing Machine (Hydraulic)  Mechanical Version-300  
Conforms to Grade A of BS: 1610, Grade 1.0 IS:1828

EKE UT-300:

Universal Testing Machine is designed for testing  metals and other materials under Tension, Compression, Bending, Transverse and Shear Loads. Hardness test on metals can also be conducted.

Principle of Operation:
Operation of the machine by hydraulic transmission of load from the test specimen to a separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife – edges, which are prone to wear out and damage due to shock on rupture of test pieces.

Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted  to the cylinder of the pendulum dynamometer system housed in the control panel. The cylinder of the dynamometer is also of self-lubricating design. The load transmitted to the cylinder of the dynamometer is transferred through a lever system to a pendulum. Displacement of pendulum actuates the rack and pinion mechanism  which operates the load indicator pointer and the autographic recorder. The deflection of the pendulum represents the absolute load applied on the test specimen.

Return movement of the pendulum effectively damped to absorb energy in the sudden breakage of specimen.

The machine consists of :

Starting Unit:
This consists of a hydraulic cylinder, motor with chain and sprocket drive and a table coupled with the ram of the hydraulic cylinder, mounted on a robust base. The cylinder and the ram are individually lapped to eliminate friction. The upper cross – head is rigidly fixed to the table by two straight columns. The lower  cross- head is connected to two screwed columns which are driven by a motor. Axial loading of the ram is ensured by relieving the cylinder and ram of any possible side loading by the provision of ball seating’s.

An elongation scale, with a minimum graduation of 1 mm, is provided to measure the deformation of the specimen.

Tension test is conducted by gripping the test specimen between the upper and lower cross-head, Compression, Transverse, bending, shear and   hardness tests are conducted between the lower cross-head and the table.

The lower cross – head can be raised or lowered rapidly by operating the screwed columns, thus facilitating ease of fixing of the test specimen.

Control Panel:
The Control Panel consists of a power pack complete with drive motor and an oil tank, control valves, a pendulum dynamometer , a load indicating system and an autographic recorder.

Power Pack:
The Power Pack generates the maximum pressure of 200 kgf/cm². the hydraulic pump provides continuously non-pulsating oil flow making the load application very smooth.

Hydraulic Controls:
Hand operated wheels are used to control the flow to and from the hydraulic cylinder. The regulation of oil flow is infinitely variable. Incorporated in the hydraulic system is a regulating valve, which maintains a practically constant rate of piston movement.

Load Indicator System:
This system consists of a large dial and a pointer. A dummy pointer is provided to register the maximum load reached during the test. Different measuring ranges can be selected by changing relevant weights on the pendulum and operating the range selection knob. An overload trip switch is incorporated which automatically EKE out the pump motor when the load range is use is exceeded 

Pendulum Dynamometer:
The unit permits selection of favorable hydraulic rations producing relatively  small frictional forces. Pressurized oil in the loading cylinder pushes up the measuring piston proportionately and actuates the special dynamometer system. The piston is constantly rotated to eliminate frication. The dynamometer system is also provided with an integral damper and ensures high reliability of operation. The load transmitted to the dynamometer is transferred through a pendulum to the load indicator.
       
Autographic Continuous Roll Load – Elongation Recorder:
This unit is of the pen and drum  and is supplied as a part of standard supply. The horizontal motion of the pen produces the load co-ordinate of the diagram and the drum rotation produces the extension co-ordinate , in the ration of either 1:5 or 1:10.

A continuous roll of graph paper is stored inside the drum and is easily replaced.

Accuracy and Calibration:
All Universal Testing Machines are closely controlled for sensitivity, accuracy and calibration during every stage of manufacture. Every machine is then calibrated over each of its measuring ranges in accordance with the procedure laid down in British Standards 1610:1964 and IS:1828 & BS 1610
Conforms to Grade A of BS: 1610, Grade 1.0 IS:1828
•    Loading accuracy as high as ± 1%
•    Starting at variable speeds to suit a wide range of materials
•    Motor driven threaded columns for quick effortless adjustment of lower cross – head to facilitate rapid fixing of test specimen.
•    Continuous roll autographic recorder supplied as standard to enable study of the behiavior of materials.
•    High reading accuracy due to large size and design of dial
•    Large effective clearance between columns enables testing of standard specimens as well as structures.

Specifications:
•    Maximum Capacity (Tonne) : 300
•    1st  Measuring Range (Tonne)  : 0-300
•    Minimum Graduations (kgf) : 500
•    2nd   Measuring Range (Tonne)  : 0-150
•    Minimum Graduations (kgf) : 250
•    3rd  Measuring Range (Tonne)  : 0-60
•    Minimum Graduations (kgf) : 100
•    4th  Measuring Range (Tonne)  : 0-30
•    Minimum Graduations (kgf) : 50
•    Ram Stroke (mm) : 250
•    Straining / Piston Speeds  (mm/min) (at no load): -

Controlled Load
•    HP : -
•    V : -
•    Φ: -

Standard Accessories:

For Tension Test :
•    Clamping Jaws for Testing Round Specimens under Tension
•    Clamping Jaws for Testing Flat Specimens under Tension

For Compression Test:
A pair of compression platens, duly hardened , ground and polished with bottom platen provided with guide lines for placing the test specimen co-axial with the hydraulic ram.

For Bending / Transverse Test:
Table with adjustable Rollers complete with Mandrel for conducting Bending/Transverse Tests

Optional Accessories:
The Universal Testing Machine is made versatile and utility oriented for carrying out a number of other tests as well with Accessories/Attachments that are Optional

These Optional Accessories/Attachments are priced nominally and are quite indispensable especially for Technical Institutions

Features:
•    Load Stabilizer
•    Brinell Hardness Test Attachment 
•    Double Shear Test Attachment : Small & Large
•    180° Bend Test Attachment
•    Bare Attachment
•    Bushes for Testing Threaded Specimens
•    Bushes for Testing Controlled Specimens
•    Attachment t for Testing Wire & Manila Ropes
•    Extensometers : Mechanical/Electronic with Fixed & Variable Gauge Length
•    Flexure Testing Attachments

Universal Testing Machine (Hydraulic)  Mechanical Version -500  
Conforms to Grade A of BS: 1610, Grade 1.0 IS:1828

EKE UT-500:

Universal Testing Machine is designed for testing  metals and other materials under Tension, Compression, Bending, Transverse and Shear Loads. Hardness test on metals can also be conducted.

Principle of Operation:
Operation of the machine by hydraulic transmission of load from the test specimen to a separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife – edges, which are prone to wear out and damage due to shock on rupture of test pieces.

Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted  to the cylinder of the pendulum dynamometer system housed in the control panel. The cylinder of the dynamometer is also of self-lubricating design. The load transmitted to the cylinder of the dynamometer is transferred through a lever system to a pendulum. Displacement of pendulum actuates the rack and pinion mechanism  which operates the load indicator pointer and the autographic recorder. The deflection of the pendulum represents the absolute load applied on the test specimen.

Return movement of the pendulum effectively damped to absorb energy in the sudden breakage of specimen.

The machine consists of :

Starting Unit:
This consists of a hydraulic cylinder, motor with chain and sprocket drive and a table coupled with the ram of the hydraulic cylinder, mounted on a robust base. The cylinder and the ram are individually lapped to eliminate friction. The upper cross – head is rigidly fixed to the table by two straight columns. The lower  cross- head is connected to two screwed columns which are driven by a motor. Axial loading of the ram is ensured by relieving the cylinder and ram of any possible side loading by the provision of ball seating’s.

An elongation scale, with a minimum graduation of 1 mm, is provided to measure the deformation of the specimen.

Tension test is conducted by gripping the test specimen between the upper and lower cross-head, Compression, Transverse, bending, shear and   hardness tests are conducted between the lower cross-head and the table.

The lower cross – head can be raised or lowered rapidly by operating the screwed columns, thus facilitating ease of fixing of the test specimen.

Control Panel:
The Control Panel consists of a power pack complete with drive motor and an oil tank, control valves, a pendulum dynamometer , a load indicating system and an autographic recorder.

Power Pack:
The Power Pack generates the maximum pressure of 200 kgf/cm². the hydraulic pump provides continuously non-pulsating oil flow making the load application very smooth.

Hydraulic Controls:
Hand operated wheels are used to control the flow to and from the hydraulic cylinder. The regulation of oil flow is infinitely variable. Incorporated in the hydraulic system is a regulating valve, which maintains a practically constant rate of piston movement.

Load Indicator System:
This system consists of a large dial and a pointer. A dummy pointer is provided to register the maximum load reached during the test. Different measuring ranges can be selected by changing relevant weights on the pendulum and operating the range selection knob. An overload trip switch is incorporated which automatically EKE out the pump motor when the load range is use is exceeded 

Pendulum Dynamometer:
The unit permits selection of favorable hydraulic rations producing relatively  small frictional forces. Pressurized oil in the loading cylinder pushes up the measuring piston proportionately and actuates the special dynamometer system. The piston is constantly rotated to eliminate frication. The dynamometer system is also provided with an integral damper and ensures high reliability of operation. The load transmitted to the dynamometer is transferred through a pendulum to the load indicator.
       
Autographic Continuous Roll Load – Elongation Recorder:
This unit is of the pen and drum  and is supplied as a part of standard supply. The horizontal motion of the pen produces the load co-ordinate of the diagram and the drum rotation produces the extension co-ordinate , in the ration of either 1:5 or 1:10.

A continuous roll of graph paper is stored inside the drum and is easily replaced.

Accuracy and Calibration:
All Universal Testing Machines are closely controlled for sensitivity, accuracy and calibration during every stage of manufacture. Every machine is then calibrated over each of its measuring ranges in accordance with the procedure laid down in British Standards 1610:1964 and IS:1828 & BS 1610
Conforms to Grade A of BS: 1610, Grade 1.0 IS:1828
•    Loading accuracy as high as ± 1%
•    Starting at variable speeds to suit a wide range of materials
•    Motor driven threaded columns for quick effortless adjustment of lower cross – head to facilitate rapid fixing of test specimen.
•    Continuous roll autographic recorder supplied as standard to enable study of the behiavior of materials.
•    High reading accuracy due to large size and design of dial
•    Large effective clearance between columns enables testing of standard specimens as well as structures.

Specifications :
•    Maximum Capacity (Tonne) : 500
•    1st  Measuring Range (Tonne)  : 0-500
•    Minimum Graduations (kgf) : 1000
•    2nd   Measuring Range (Tonne)  : 0-250
•    Minimum Graduations (kgf) : 500
•    3rd  Measuring Range (Tonne)  : 0-100
•    Minimum Graduations (kgf) : 250
•    4th  Measuring Range (Tonne)  : 0-50
•    Minimum Graduations (kgf) :100
•    Ram Stroke (mm) :250
•    Straining / Piston Speeds  (mm/min) (at no load): 0-60

Controlled Load
•    HP : 10
•    V : 400-440
•    Φ: 3

Standard Accessories:

For Tension Test :
•    Clamping Jaws for Testing Round Specimens under Tension
•    Clamping Jaws for Testing Flat Specimens under Tension

For Compression Test:
A pair of compression platens, duly hardened , ground and polished with bottom platen provided with guide lines for placing the test specimen co-axial with the hydraulic ram.

For Bending / Transverse Test:
Table with adjustable Rollers complete with Mandrel for conducting Bending/Transverse Tests

Optional Accessories:
The Universal Testing Machine is made versatile and utility oriented for carrying out a number of other tests as well with Accessories/Attachments that are Optional

These Optional Accessories/Attachments are priced nominally and are quite indispensable especially for Technical Institutions

Features:
•    Load Stabilizer
•    Brinell Hardness Test Attachment 
•    Double Shear Test Attachment : Small & Large
•    180° Bend Test Attachment
•    Bare Attachment
•    Bushes for Testing Threaded Specimens
•    Bushes for Testing Controlled Specimens
•    Attachment t for Testing Wire & Manila Ropes
•    Extensometers : Mechanical/Electronic with Fixed & Variable Gauge Length
•    Flexure Testing Attachments