ELASTOMERIC BEARING TEST MACHINE/ CHAIN AND ROPE TENSILE TEST MACHINE

Elastomeric Bearing Test Machine

EKE EBM. 10:

Technical Specifications:
-    Vertical piston capacity (kN) : 2000
-    Load sensitivity : 0.5%
-    Vertical piston speed : System can proceed with load control
-    Vertical piston stroke (mm) : 400
-    Deformation sensitivity : 0.5%
-    Deformation resolution : 1 micron
-    Horizontal piston capacity (kN) : 200
-    Sensitivity : 0.5%
-    Horizontal piston speed : 628 mm/s
-    Horizontal piston stroke ( 00) : 400
-    Deformation sensitivity : 0.5%
-    Deformation resolution : 1 micron

Chain And Rope Tensile Test Machine

EKE BMT.300:

ENKAY BTM – 300 Ton capacity Electronically Controlled Servo – Hydraulic Rope and Chain Tensile Test Machine, manufactured according to standards and is suitable for testing high elongation capacity samples due to improved system.

It has double acting piston with stroke of 150 cm. Also there is a spherical seal system to create minimum friction. Machine can perform load and displacement controlled tests. Load measurement is with load cell with measurement accuracy of class one.

Displacement or elongation measurements with special encoder type extensometer having 200 mm measuring length. System is equipped with 300 Ton Loading Capacity, 25 mm chain and rope holding load Frame (ENKAY) , Hydraulic Piston with very Low Friction factor (ENKAY), PT Load Cell of Class 0.5, Encoder type Elongation Sensor (JAPAN) , MOOG Servo Valve (GERMANY), HAWE Direction Safety valve (GERMANY) and Electronic Controller ( GERMANY).