COMPRESSIVE STRENGTH

ENKAY Series Compression Testing Machines are the finest of their type obtainable. The rugged construction and extreme simplicity make it possible for even non-technical personnel to operate them with ease and complete dependability. In particular, the portable units, which are small in dimension, study and light in weight, make quality control testing possible in areas where commercial testing facilities are not available and where the transportation of larger and much heavier machines would be difficult.

ENKAY Compression Testing Machines conform to IS:14858 (2000) and calibrated with an accuracy of ± 1% as per the requirement of 1828 (gradeA) . It can also be supplied as per BS : 1881 and other associated International Standards. These machines are available in 50kN, 100kN, 500kN, 1000kN, 2000kN, 3000kN, 5000kN, & 10,000kN Capacities

Compression Testing Machines Classification

• Portable model
• Analogue models
• Digital models with pace rate indicators
• Fully automatic models

Some of the salient features are

• High stability
• Self-aligning platen assembly
• Load Gauges are calibrated in kN against certified Proving Rings,traceable to NPL / NCCBM/PTB Germany (on request)
• Suitable for testing cubes and cylinders of various sizes
• Using special platens, bricks can also be tested
• Logged data printing facility through a parallel port interface available in digital and micro controller based versions
• Calibration process accredited by NABL (National Accreditation ?Board for Laboratories, Ministry of Science & Technology
• Machines with CE mark also available, on special request
• Operator’s safety features like metal door with a perspex window and overload tripping device are provided in all models
• Electrical interlock safety switch provided in the Fully Automatic Compression Testing Machines, for the front door operation

Portable compression testing machine

The equipment consists of a Loading Unit, an integral double acting manually operated pumping unit fitted to the base of the machine and a calibrated Load Gauge is fitted with the top. It has a detachable Hydraulic Jack. The hydraulic cylinder is placed on the base of the Loading Unit.

SPECIFICATION

Capacity : 1000kN

Max Vertical Clearance : 350mm

Max. Horizontal Clearance : 220mm

Platen Size : 165mm

Square Piston Dia : 152.4mm

Piston Stroke : 25mm

PUMPING UNIT

The hydraulic pumping unit is:

• Manually Operated
• or Electrically operated

Compression Strength
Compression Testing Machine (CTM)  Machine -2000 KN Capacity
Electrically  Operated
 
EKE 305H-EK:

Technical Parameters

Compression testing machine are designed for determining the compressive strength of cement, concrete cubes, cylinders and other masonry products. 

The loading unit is of fully welded construction having a cross head, base and solid side plates. The hydraulic jack is fixed to the base. The platens of the    machine are hardened, ground and polished and provided with guideless to keep the specimen coaxial with hydraulic ram.

The upper platen is provided with self – aligning action. To facilitate testing of various size specimens. Suitable size spacers are provided. 

The loads are measured on Bourdon tube type load gauges which are calibrated against certified proving rings. The load gauges are fitted with a maximum load pointer. 

Both the Pumping units , Electrically operated, are of two – speed design . The two speed pump facilitates fast approach  of the platens for daylight closure , thus eliminating the need for the lead screw.

In the Electrically Operated Pumping Units, load gauge is fitted with micro switches to switch- off the motor when the load approaches the maximum capacity of the gauge, to avoid any over – loading. Relays are incorporated o that the motor does not restart its own after a power breakdown.
The electrically operated pumping units are provided with a control knob to adjust the pace rate which can be effectively controlled by an experienced operator during the course of testing, by observing the progress of the load gauge reading.

Compression Strength
Automatic Compression Testing Machine – 2000 kN Capacity
Ref. Standard : ASTM C36; EN 12390:4

B-001/LCD/2:

→  Used to test the compression strength of concrete cubes/cylinders of different sizes
→  The rigid design provides stability and strength for a better using experience
→  Equipped with an LCD unit that displays the data graphically of each test with the ability to save and recall the results of the tested specimens.
→  The Data Acquisition Control provides real-time graphical indication
→  Automatically determines the load rate in accordance with the International Standards upon sample type.
→  With the AUTO – STOP function, the test will automatically stop.
→  Fully automatic mode or manual mode in which the user gets the ability to adjust the load rate andperiod manually are available
→  Supplied complete with spare discs

Technical Specifications:
•    Fully Automatic
•    Graphical – LCD Data Acquisition Control System
•    Automatic Load Rate upon Sample Type
•    Stops Automatically, when test is completed
•    Real time graph indication
•    Total load and also Per Area are given
•    Test results can be transferred to computer to be printed or from the thermal printer
•    Different units are available (kN/kgf/lbf)
•    Calibration done easily on 5 pts.
•    Manual Control is available 
•    If weight of sample entered , Unit Weight is determined 
•    Rigid Frame
•    Upper and Lower Platens in accordance with international Specifications
•    Upper Seating for Homogeneous Loading
•    Distance Pieces included
•    Power Supply 220-240 V/50 + 60 Hz (110 V/60 Hz is also available)
•    Computer and printer are not included in the price

Testable Specimen Sizes:
•    Cubes with side length of 100 mm, 150 mm, 200 mm or any other custom cube/prism size can be tested with the machine.
•    Cylinders with diameter of 150 mm, 160 mm and height of 300 mm, 320 mm relatively or any other custom diameter and height can be tested with the machine.

 Navigating Through the LCD Control Unit:
•    Using the LCD Control unit, to perform tests, to calibrate and to adjust the settings of the machine provides an easy  and user         friendly experience 

-    Capacity : 2000 kN
-    Frame : Welded, Rigid mono – block frame
-    Upper Platen Dimension (A) : Φ300 mm
-    Lower Platen Dimension (A) : Φ300 mm
-    Piston Stroke : 50 mm
-    (B) : 50 mm
-    Horizontal Clearance ( C) : 330 mm
-    Maximum Vertical Clearance : 345 mm
-    ( F) : 185 mm
-    Height ( H) : 890

ENKAY Compression Tester Software:
•    The tests and calibration can be done and monitored with a computer by connecting it to the machine. Using the state of the art software provided by ENKAY with the machine will help performing and managing the tests in a very easy and fast way.
•    By performing the tests via computer, the results can be saved and recalled when required. Reports can be generated automatically by the software and sent to printer

Performing the Test in Accordance to ASTM C 39:
•    Simply navigate through the LCD control panel by selecting “TEST (ASTM)” from the main screen
•    Choose the diameter of the cylinder (in inches) or specially the custom dimensions of your sample
•    Choose the made from the main screen by selecting either AUTOMATIC or MANUAL
•    Press “Start” to begin the test

Performing the Test in Accordance to EN 12390:4
•    Simply navigate through the LCD control panel by selecting “TEST (EN)” from the main screen
•    Choose the diameter of the cylinder (in inches) or specially the custom dimensions of your sample
•    Choose the made from the main screen by selecting either AUTOMATIC or MANUAL
•    Press “Start” to begin the test
 

Concrete Pipe Testing Machine – 400 kN

B-001/PT/0400:

•    Supplied with graphical LCD Data Acquisition Control System and an ability to store and report the results
•    The calibration for the equipment can be easily done on 5 pts
•    Pipe length and diameter should be specified at the time of inquiry

Concrete Pipe Testing Machine – 1000 kN

B-001/PT/1000:

•    Supplied with graphical LCD Data Acquisition Control System and an ability to store and report the results
•    The calibration for the equipment can be easily done on 5 pts
•    Pipe length and diameter should be specified at the time of inquiry

Compression Strength
Servo Controlled Compression Testing Machine- Capacity 50 kN

EKE 302 - SERV:

ENKAY Series of Servo Controlled Compression Testing Machines are the finest of their types available. The rugged construction and extreme simplicity makes it possible for personal with minimum Training to operate them with ease and complete dependability.

ENKAY Series of Servo Controlled Compression Testing Machine is a fully automated version of the manual/semi-automatic Compression Testing Machine  having provision for stress and strain controlled loading. The machine having working ranges from 0.5 kN to 50 kN for 50 kN capacity and 30 kN to 3000 kN for 3000 kN capacity. The machine is available in 50 kN to 3000 kN ranges. It has provision for automatically turning the pump on and off, controlling the set pace rate/displacement rate and switching the machine off under predetermined conditions.

The control releases the pressure at the end of every run and reinitializes the machine  at the beginning of every set. Data acquisition , storage, management ad analysis are all fully automated.

The system ha essentially three parts:
•    Loading Unit
•    Hydraulic Power Pack
•    Control Unit and Display

Loading Unit:
The loading unit is fully welded construction having a cross head, base and solid side plates. A hydraulic jack is fixed to the base, the platens of the machine are hardened , ground and polished.

The upper platen is provided with self-aligning action. To facilitate testing of various size spacimens, suitable size spacers are provided.

Hydraulic Power Pack:
•    Max. working pressure : 300 bar
•    Max. oil deliver : 10 lpm
•    Oil tank capacity : 150 ltrs
•    Hydraulic ports for connection of test frames
•    Oil flow control via servo – controlled proportional valve
•    Oil water cooling system with forced ventilation
•    Operating temperature range for servo valve : 29°C to 135°C
•    Burst pressure : 250% max. supply pressure
•    External Leakage : Zero
•    Vibration : 30g, 3 axes
•    Fluid cleanliness level per ISO 4406:1999: min. 16/14/12 and recommended 14/12/10
•    Hysteresis should not be more than 3.0 %
•    Threshold should not be less than 0.5%
•    Supply pressure : Constant

Hardware And Controlling Unit:
•    Robust , Stand alone, low power data logger with USB memory stick support.
•    Analog Resolution : 24 bit
•    Inbuilt RTC for the real in standalone mode
•    Easy Configurable Window Based Software to configure the DAQ through PC
•    Stand Alone and Real Time Data Acquisition , Keypad should have capability to configure the system.
•    LCD display with 4 line 20 characters with back light
•    Working range of load control 0.1 to 1% of full scale
•    Working range of displacement control 1 micron to 100 micron per sec
•    Operating temperature range : 45°C to 70°C
•    Display functions – channel data
•    Power supply – 230 V, 50 Hz, or 12V DC on customer requirement
•    Inbuilt battery for Real time clock
•    Accepts input as along voltage in the range of ± 2.5 V
•    Log Interval should be configurable from 1 sec to HH:MM:SS
•    System should have the capacity to interface the counter to interface the counter to interface the encoder for future expansion

Analog Inputs:
•    Maximum 8 number of analog channels
•    Maximum Input Voltage : 0-2.5 V±2.5 V
•    Accuracy 0.1%
•    Over Protection Voltage : 10V

Memory And Communication:
•    Internal Storage minimum capacity should be 8MB, Should have provision for interfacing pen drive
•    Can store on to PC which is configurable
•    Should be able to unload the stored data in USB Pen Drive

Communication Interfaces : 
•    USB & Ethernet

Recommended Computer Hardware:
•    1.9 Ghz, Pentium i5
•    8 GB RAM
-    Using multiple testing machines may require additional memory and / or a faster processor
-    32 bit system are limited to a maximum of 4GB of which only 3.25  GB is available due to system overheads.
     •     512 MB Direct x 10.0 capable video card or better
     •     500 GB HD Drive
     •     RS232 Serial Port
-    1 Integrated serial port (Not USB) where possible per testing machine
-    If RS232 serial port unavailable , then 1 USB serial port with RS232/USB adapter is required (Per machine)
•    USB Port
-    1 USB Port for use with the machine
-    1 USB Port for Printer
-    Additional ports for required measuring devices, barcode scanners etc.
•    Ethernet Port (to rub the machine)
•    DVD-ROM Drive (to run installation DVD)
•    Mouse or pointing device and keyboard supported by windows 
•    Monitor
-    32 – bit color
-    1600 x 900 (Widescreen) or higher
-    If a touch screen is used, Windows 8 is best 
•    Windows compatible printer (for reporting capabilities)
•    Windows compatible sound card and speakers (for audio playback)
•    An active Internet Connection   (for team viewer use and help desk support)

Software Requirements :
•    ENKAY Servo Software is designed for 32-bit and 64-bit operating systems running Windows 7. It does not support Windows XP and below.

Note: A 64-bit operating system is preferred for best Performance

ENKAY Scope of Supply Software Include:
•    Desktop Computer or Laptop with licensed Windows 7 64-bit
•    ENKAY Servo Software
•    MS-Office

Note: Any Third software required has to be purchased by the Customer Directly

ENKAY Servo Software:
•    Control parameter – Load/Displacement
•    Has facility to monitor the data of channels
•    Labels of channels are configurable
•    Plots Graph – Displacement vs Time, Load vs Time, Load vs Displacement, Stress vs Strain etc.
•    Report in excel and PDF for storing the date
•    Generates graphs in effective mode

Physical Specification:
•    Power Rating of motor : 5 HP
•    Voltage : 440 V, 3 – Phase AC Supply

Compression Strength
Servo Controlled Compression Testing Machine- Capacity 100 kN

EKE 305 - SERV:

ENKAY Series of Servo Controlled Compression Testing Machines are the finest of their types available. The rugged construction and extreme simplicity makes it possible for personal with minimum Training to operate them with ease and complete dependability.

ENKAY Series of Servo Controlled Compression Testing Machine is a fully automated version of the manual/semi-automatic Compression Testing Machine  having provision for stress and strain controlled loading. The machine having working ranges from 0.5 kN to 50 kN for 50 kN capacity and 30 kN to 3000 kN for 3000 kN capacity. The machine is available in 50 kN to 3000 kN ranges. It has provision for automatically turning the pump on and off, controlling the set pace rate/displacement rate and switching the machine off under predetermined conditions.

The control releases the pressure at the end of every run and reinitializes the machine  at the beginning of every set. Data acquisition , storage, management ad analysis are all fully automated.

The system ha essentially three parts:
•    Loading Unit
•    Hydraulic Power Pack
•    Control Unit and Display

Loading Unit:
The loading unit is fully welded construction having a cross head, base and solid side plates. A hydraulic jack is fixed to the base, the platens of the machine are hardened , ground and polished.

The upper platen is provided with self-aligning action. To facilitate testing of various size spacimens, suitable size spacers are provided.

Hydraulic Power Pack:
•    Max. working pressure : 300 bar
•    Max. oil deliver : 10 lpm
•    Oil tank capacity : 150 ltrs
•    Hydraulic ports for connection of test frames
•    Oil flow control via servo – controlled proportional valve
•    Oil water cooling system with forced ventilation
•    Operating temperature range for servo valve : 29°C to 135°C
•    Burst pressure : 250% max. supply pressure
•    External Leakage : Zero
•    Vibration : 30g, 3 axes
•    Fluid cleanliness level per ISO 4406:1999: min. 16/14/12 and recommended 14/12/10
•    Hysteresis should not be more than 3.0 %
•    Threshold should not be less than 0.5%
•    Supply pressure : Constant

Hardware And Controlling Unit:
•    Robust , Stand alone, low power data logger with USB memory stick support.
•    Analog Resolution : 24 bit
•    Inbuilt RTC for the real in standalone mode
•    Easy Configurable Window Based Software to configure the DAQ through PC
•    Stand Alone and Real Time Data Acquisition , Keypad should have capability to configure the system.
•    LCD display with 4 line 20 characters with back light
•    Working range of load control 0.1 to 1% of full scale
•    Working range of displacement control 1 micron to 100 micron per sec
•    Operating temperature range : 45°C to 70°C
•    Display functions – channel data
•    Power supply – 230 V, 50 Hz, or 12V DC on customer requirement
•    Inbuilt battery for Real time clock
•    Accepts input as along voltage in the range of ± 2.5 V
•    Log Interval should be configurable from 1 sec to HH:MM:SS
•    System should have the capacity to interface the counter to interface the counter to interface the encoder for future expansion

Analog Inputs:
•    Maximum 8 number of analog channels
•    Maximum Input Voltage : 0-2.5 V±2.5 V
•    Accuracy 0.1%
•    Over Protection Voltage : 10V

Memory And Communication:
•    Internal Storage minimum capacity should be 8MB, Should have provision for interfacing pen drive
•    Can store on to PC which is configurable
•    Should be able to unload the stored data in USB Pen Drive

Communication Interfaces: 
•    USB & Ethernet

Recommended Computer Hardware:
•    1.9 Ghz, Pentium i5
•    8 GB RAM
-    Using multiple testing machines may require additional memory and / or a faster processor
-    32 bit system are limited to a maximum of 4GB of which only 3.25  GB is available due to system overheads.
     •     512 MB Direct x 10.0 capable video card or better
     •     500 GB HD Drive
     •     RS232 Serial Port
-    1 Integrated serial port (Not USB) where possible per testing machine
-    If RS232 serial port unavailable , then 1 USB serial port with RS232/USB adapter is required (Per machine)
•    USB Port
-    1 USB Port for use with the machine
-    1 USB Port for Printer
-    Additional ports for required measuring devices, barcode scanners etc.
•    Ethernet Port (to rub the machine)
•    DVD-ROM Drive (to run installation DVD)
•    Mouse or pointing device and keyboard supported by windows 
•    Monitor
-    32 – bit color
-    1600 x 900 (Widescreen) or higher
-    If a touch screen is used, Windows 8 is best 
•    Windows compatible printer (for reporting capabilities)
•    Windows compatible sound card and speakers (for audio playback)
•    An active Internet Connection   (for team viewer use and help desk support)

Software Requirements:
•    ENKAY Servo Software is designed for 32-bit and 64-bit operating systems running Windows 7. It does not support Windows XP and below.

Note: A 64-bit operating system is preferred for best Performance

ENKAY Scope of Supply Software Include:
•    Desktop Computer or Laptop with licensed Windows 7 64-bit
•    ENKAY Servo Software
•    MS-Office

Note: Any Third software required has to be purchased by the Customer Directly

ENKAY Servo Software:
•    Control parameter – Load/Displacement
•    Has facility to monitor the data of channels
•    Labels of channels are configurable
•    Plots Graph – Displacement vs Time, Load vs Time, Load vs Displacement, Stress vs Strain etc.
•    Report in excel and PDF for storing the date
•    Generates graphs in effective mode

Physical Specification:
•    Power Rating of motor : 5 HP
•    Voltage : 440 V, 3 – Phase AC Supply

Compression Strength
Servo Controlled Compression Testing Machine- Capacity 250 kN

EKE 308 - SERV:

ENKAY Series of Servo Controlled Compression Testing Machines are the finest of their types available. The rugged construction and extreme simplicity makes it possible for personal with minimum Training to operate them with ease and complete dependability.

ENKAY Series of Servo Controlled Compression Testing Machine is a fully automated version of the manual/semi-automatic Compression Testing Machine  having provision for stress and strain controlled loading. The machine having working ranges from 0.5 kN to 50 kN for 50 kN capacity and 30 kN to 3000 kN for 3000 kN capacity. The machine is available in 50 kN to 3000 kN ranges. It has provision for automatically turning the pump on and off, controlling the set pace rate/displacement rate and switching the machine off under predetermined conditions.

The control releases the pressure at the end of every run and reinitializes the machine  at the beginning of every set. Data acquisition , storage, management ad analysis are all fully automated.

The system has essentially three parts:
•    Loading Unit
•    Hydraulic Power Pack
•    Control Unit and Display

Loading Unit:
The loading unit is fully welded construction having a cross head, base and solid side plates. A hydraulic jack is fixed to the base, the platens of the machine are hardened , ground and polished.

The upper platen is provided with self-aligning action. To facilitate testing of various size spacimens, suitable size spacers are provided.

Hydraulic Power Pack:
•    Max. working pressure : 300 bar
•    Max. oil deliver : 10 lpm
•    Oil tank capacity : 150 ltrs
•    Hydraulic ports for connection of test frames
•    Oil flow control via servo – controlled proportional valve
•    Oil water cooling system with forced ventilation
•    Operating temperature range for servo valve : 29°C to 135°C
•    Burst pressure : 250% max. supply pressure
•    External Leakage : Zero
•    Vibration : 30g, 3 axes
•    Fluid cleanliness level per ISO 4406:1999: min. 16/14/12 and recommended 14/12/10
•    Hysteresis should not be more than 3.0 %
•    Threshold should not be less than 0.5%
•    Supply pressure : Constant

Hardware And Controlling Unit:
•    Robust , Stand alone, low power data logger with USB memory stick support.
•    Analog Resolution : 24 bit
•    Inbuilt RTC for the real in standalone mode
•    Easy Configurable Window Based Software to configure the DAQ through PC
•    Stand Alone and Real Time Data Acquisition , Keypad should have capability to configure the system.
•    LCD display with 4 line 20 characters with back light
•    Working range of load control 0.1 to 1% of full scale
•    Working range of displacement control 1 micron to 100 micron per sec
•    Operating temperature range : 45°C to 70°C
•    Display functions – channel data
•    Power supply – 230 V, 50 Hz, or 12V DC on customer requirement
•    Inbuilt battery for Real time clock
•    Accepts input as along voltage in the range of ± 2.5 V
•    Log Interval should be configurable from 1 sec to HH:MM:SS
•    System should have the capacity to interface the counter to interface the counter to interface the encoder for future expansion

Analog Inputs:
•    Maximum 8 number of analog channels
•    Maximum Input Voltage : 0-2.5 V±2.5 V
•    Accuracy 0.1%
•    Over Protection Voltage : 10V

Memory And Communication:
•    Internal Storage minimum capacity should be 8MB, Should have provision for interfacing pen drive
•    Can store on to PC which is configurable
•    Should be able to unload the stored data in USB Pen Drive

Communication Interfaces : 
•    USB & Ethernet

Recommended Computer Hardware:
•    1.9 Ghz, Pentium i5
•    8 GB RAM
-    Using multiple testing machines may require additional memory and / or a faster processor
-    32 bit system are limited to a maximum of 4GB of which only 3.25  GB is available due to system overheads.
     •     512 MB Direct x 10.0 capable video card or better
     •     500 GB HD Drive
     •     RS232 Serial Port
-    1 Integrated serial port (Not USB) where possible per testing machine
-    If RS232 serial port unavailable , then 1 USB serial port with RS232/USB adapter is required (Per machine)
•    USB Port
-    1 USB Port for use with the machine
-    1 USB Port for Printer
-    Additional ports for required measuring devices, barcode scanners etc.
•    Ethernet Port (to rub the machine)
•    DVD-ROM Drive (to run installation DVD)
•    Mouse or pointing device and keyboard supported by windows 
•    Monitor
-    32 – bit color
-    1600 x 900 (Widescreen) or higher
-    If a touch screen is used, Windows 8 is best 
•    Windows compatible printer (for reporting capabilities)
•    Windows compatible sound card and speakers (for audio playback)
•    An active Internet Connection   (for team viewer use and help desk support)

Software Requirements :
•    ENKAY Servo Software is designed for 32-bit and 64-bit operating systems running Windows 7. It does not support Windows XP and below.

Note: A 64-bit operating system is preferred for best Performance

ENKAY Scope of Supply Software Include:
•    Desktop Computer or Laptop with licensed Windows 7 64-bit
•    ENKAY Servo Software
•    MS-Office

Note: Any Third software required has to be purchased by the Customer Directly

ENKAY Servo Software:
•    Control parameter – Load/Displacement
•    Has facility to monitor the data of channels
•    Labels of channels are configurable
•    Plots Graph – Displacement vs Time, Load vs Time, Load vs Displacement, Stress vs Strain etc.
•    Report in excel and PDF for storing the date
•    Generates graphs in effective mode

Physical Specification:
•    Power Rating of motor : 5 HP
•    Voltage : 440 V, 3 – Phase AC Supply

Compression Strength
Servo Controlled Compression Testing Machine- Capacity 500 kN

EKE 311 - SERV:

ENKAY Series of Servo Controlled Compression Testing Machines are the finest of their types available. The rugged construction and extreme simplicity makes it possible for personal with minimum Training to operate them with ease and complete dependability.

ENKAY Series of Servo Controlled Compression Testing Machine is a fully automated version of the manual/semi-automatic Compression Testing Machine  having provision for stress and strain controlled loading. The machine having working ranges from 0.5 kN to 50 kN for 50 kN capacity and 30 kN to 3000 kN for 3000 kN capacity. The machine is available in 50 kN to 3000 kN ranges. It has provision for automatically turning the pump on and off, controlling the set pace rate/displacement rate and switching the machine off under predetermined conditions.

The control releases the pressure at the end of every run and reinitializes the machine  at the beginning of every set. Data acquisition , storage, management ad analysis are all fully automated.

The system ha essentially three parts:
•    Loading Unit
•    Hydraulic Power Pack
•    Control Unit and Display

Loading Unit:
The loading unit is fully welded construction having a cross head, base and solid side plates. A hydraulic jack is fixed to the base, the platens of the machine are hardened , ground and polished.

The upper platen is provided with self-aligning action. To facilitate testing of various size spacimens, suitable size spacers are provided.

Hydraulic Power Pack:
•    Max. working pressure : 300 bar
•    Max. oil deliver : 10 lpm
•    Oil tank capacity : 150 ltrs
•    Hydraulic ports for connection of test frames
•    Oil flow control via servo – controlled proportional valve
•    Oil water cooling system with forced ventilation
•    Operating temperature range for servo valve : 29°C to 135°C
•    Burst pressure : 250% max. supply pressure
•    External Leakage : Zero
•    Vibration : 30g, 3 axes
•    Fluid cleanliness level per ISO 4406:1999: min. 16/14/12 and recommended 14/12/10
•    Hysteresis should not be more than 3.0 %
•    Threshold should not be less than 0.5%
•    Supply pressure : Constant

Hardware And Controlling Unit:
•    Robust , Stand alone, low power data logger with USB memory stick support.
•    Analog Resolution : 24 bit
•    Inbuilt RTC for the real in standalone mode
•    Easy Configurable Window Based Software to configure the DAQ through PC
•    Stand Alone and Real Time Data Acquisition , Keypad should have capability to configure the system.
•    LCD display with 4 line 20 characters with back light
•    Working range of load control 0.1 to 1% of full scale
•    Working range of displacement control 1 micron to 100 micron per sec
•    Operating temperature range : 45°C to 70°C
•    Display functions – channel data
•    Power supply – 230 V, 50 Hz, or 12V DC on customer requirement
•    Inbuilt battery for Real time clock
•    Accepts input as along voltage in the range of ± 2.5 V
•    Log Interval should be configurable from 1 sec to HH:MM:SS
•    System should have the capacity to interface the counter to interface the counter to interface the encoder for future expansion

Analog Inputs:
•    Maximum 8 number of analog channels
•    Maximum Input Voltage : 0-2.5 V±2.5 V
•    Accuracy 0.1%
•    Over Protection Voltage : 10V

Memory And Communication:
•    Internal Storage minimum capacity should be 8MB, Should have provision for interfacing pen drive
•    Can store on to PC which is configurable
•    Should be able to unload the stored data in USB Pen Drive

Communication Interfaces : 
•    USB & Ethernet

Recommended Computer Hardware:
•    1.9 Ghz, Pentium i5
•    8 GB RAM
-    Using multiple testing machines may require additional memory and / or a faster processor
-    32 bit system are limited to a maximum of 4GB of which only 3.25  GB is available due to system overheads.
     •     512 MB Direct x 10.0 capable video card or better
     •     500 GB HD Drive
     •     RS232 Serial Port
-    1 Integrated serial port (Not USB) where possible per testing machine
-    If RS232 serial port unavailable , then 1 USB serial port with RS232/USB adapter is required (Per machine)
•    USB Port
-    1 USB Port for use with the machine
-    1 USB Port for Printer
-    Additional ports for required measuring devices, barcode scanners etc.
•    Ethernet Port (to rub the machine)
•    DVD-ROM Drive (to run installation DVD)
•    Mouse or pointing device and keyboard supported by windows 
•    Monitor
-    32 – bit color
-    1600 x 900 (Widescreen) or higher
-    If a touch screen is used, Windows 8 is best 
•    Windows compatible printer (for reporting capabilities)
•    Windows compatible sound card and speakers (for audio playback)
•    An active Internet Connection   (for team viewer use and help desk support)

Software Requirements :
•    ENKAY Servo Software is designed for 32-bit and 64-bit operating systems running Windows 7. It does not support Windows XP and below.

Note: A 64-bit operating system is preferred for best Performance

ENKAY Scope of Supply Software Include:
•    Desktop Computer or Laptop with licensed Windows 7 64-bit
•    ENKAY Servo Software
•    MS-Office

Note: Any Third software required has to be purchased by the Customer Directly

ENKAY Servo Software:
•    Control parameter – Load/Displacement
•    Has facility to monitor the data of channels
•    Labels of channels are configurable
•    Plots Graph – Displacement vs Time, Load vs Time, Load vs Displacement, Stress vs Strain etc.
•    Report in excel and PDF for storing the date
•    Generates graphs in effective mode

Physical Specification:
•    Power Rating of motor : 5 HP
•    Voltage : 440 V, 3 – Phase AC Supply

Compression Strength
Servo Controlled Compression Testing Machine- Capacity 1000 kN

EKE 314 - SERV:

ENKAY Series of Servo Controlled Compression Testing Machines are the finest of their types available. The rugged construction and extreme simplicity makes it possible for personal with minimum Training to operate them with ease and complete dependability.

ENKAY Series of Servo Controlled Compression Testing Machine is a fully automated version of the manual/semi-automatic Compression Testing Machine  having provision for stress and strain controlled loading. The machine having working ranges from 0.5 kN to 50 kN for 50 kN capacity and 30 kN to 3000 kN for 3000 kN capacity. The machine is available in 50 kN to 3000 kN ranges. It has provision for automatically turning the pump on and off, controlling the set pace rate/displacement rate and switching the machine off under predetermined conditions.

The control releases the pressure at the end of every run and reinitializes the machine  at the beginning of every set. Data acquisition , storage, management ad analysis are all fully automated.

The system ha essentially three parts:
•    Loading Unit
•    Hydraulic Power Pack
•    Control Unit and Display

Loading Unit:
The loading unit is fully welded construction having a cross head, base and solid side plates. A hydraulic jack is fixed to the base, the platens of the machine are hardened , ground and polished.

The upper platen is provided with self-aligning action. To facilitate testing of various size spacimens, suitable size spacers are provided.

Hydraulic Power Pack:
•    Max. working pressure : 300 bar
•    Max. oil deliver : 10 lpm
•    Oil tank capacity : 150 ltrs
•    Hydraulic ports for connection of test frames
•    Oil flow control via servo – controlled proportional valve
•    Oil water cooling system with forced ventilation
•    Operating temperature range for servo valve : 29°C to 135°C
•    Burst pressure : 250% max. supply pressure
•    External Leakage : Zero
•    Vibration : 30g, 3 axes
•    Fluid cleanliness level per ISO 4406:1999: min. 16/14/12 and recommended 14/12/10
•    Hysteresis should not be more than 3.0 %
•    Threshold should not be less than 0.5%
•    Supply pressure : Constant

Hardware And Controlling Unit:
•    Robust , Stand alone, low power data logger with USB memory stick support.
•    Analog Resolution : 24 bit
•    Inbuilt RTC for the real in standalone mode
•    Easy Configurable Window Based Software to configure the DAQ through PC
•    Stand Alone and Real Time Data Acquisition , Keypad should have capability to configure the system.
•    LCD display with 4 line 20 characters with back light
•    Working range of load control 0.1 to 1% of full scale
•    Working range of displacement control 1 micron to 100 micron per sec
•    Operating temperature range : 45°C to 70°C
•    Display functions – channel data
•    Power supply – 230 V, 50 Hz, or 12V DC on customer requirement
•    Inbuilt battery for Real time clock
•    Accepts input as along voltage in the range of ± 2.5 V
•    Log Interval should be configurable from 1 sec to HH:MM:SS
•    System should have the capacity to interface the counter to interface the counter to interface the encoder for future expansion

Analog Inputs:
•    Maximum 8 number of analog channels
•    Maximum Input Voltage : 0-2.5 V±2.5 V
•    Accuracy 0.1%
•    Over Protection Voltage : 10V

Memory And Communication:
•    Internal Storage minimum capacity should be 8MB, Should have provision for interfacing pen drive
•    Can store on to PC which is configurable
•    Should be able to unload the stored data in USB Pen Drive

Communication Interfaces : 
•    USB & Ethernet

Recommended Computer Hardware:
•    1.9 Ghz, Pentium i5
•    8 GB RAM
-    Using multiple testing machines may require additional memory and / or a faster processor
-    32 bit system are limited to a maximum of 4GB of which only 3.25  GB is available due to system overheads.
     •     512 MB Direct x 10.0 capable video card or better
     •     500 GB HD Drive
     •     RS232 Serial Port
-    1 Integrated serial port (Not USB) where possible per testing machine
-    If RS232 serial port unavailable , then 1 USB serial port with RS232/USB adapter is required (Per machine)
•    USB Port
-    1 USB Port for use with the machine
-    1 USB Port for Printer
-    Additional ports for required measuring devices, barcode scanners etc.
•    Ethernet Port (to rub the machine)
•    DVD-ROM Drive (to run installation DVD)
•    Mouse or pointing device and keyboard supported by windows 
•    Monitor
-    32 – bit color
-    1600 x 900 (Widescreen) or higher
-    If a touch screen is used, Windows 8 is best 
•    Windows compatible printer (for reporting capabilities)
•    Windows compatible sound card and speakers (for audio playback)
•    An active Internet Connection   (for team viewer use and help desk support)

Software Requirements :
•    ENKAY Servo Software is designed for 32-bit and 64-bit operating systems running Windows 7. It does not support Windows XP and below.

Note: A 64-bit operating system is preferred for best Performance

ENKAY Scope of Supply Software Include:
•    Desktop Computer or Laptop with licensed Windows 7 64-bit
•    ENKAY Servo Software
•    MS-Office

Note: Any Third software required has to be purchased by the Customer Directly

ENKAY Servo Software:
•    Control parameter – Load/Displacement
•    Has facility to monitor the data of channels
•    Labels of channels are configurable
•    Plots Graph – Displacement vs Time, Load vs Time, Load vs Displacement, Stress vs Strain etc.
•    Report in excel and PDF for storing the date
•    Generates graphs in effective mode

Physical Specification:
•    Power Rating of motor : 5 HP
•    Voltage : 440 V, 3 – Phase AC Supply
 

Compression Strength
Servo Controlled Compression Testing Machine- Capacity 2000 kN

EKE 317 - SERV:

ENKAY Series of Servo Controlled Compression Testing Machines are the finest of their types available. The rugged construction and extreme simplicity makes it possible for personal with minimum Training to operate them with ease and complete dependability.

ENKAY Series of Servo Controlled Compression Testing Machine is a fully automated version of the manual/semi-automatic Compression Testing Machine  having provision for stress and strain controlled loading. The machine having working ranges from 0.5 kN to 50 kN for 50 kN capacity and 30 kN to 3000 kN for 3000 kN capacity. The machine is available in 50 kN to 3000 kN ranges. It has provision for automatically turning the pump on and off, controlling the set pace rate/displacement rate and switching the machine off under predetermined conditions.

The control releases the pressure at the end of every run and reinitializes the machine  at the beginning of every set. Data acquisition , storage, management ad analysis are all fully automated.

The system ha essentially three parts:
•    Loading Unit
•    Hydraulic Power Pack
•    Control Unit and Display

Loading Unit:
The loading unit is fully welded construction having a cross head, base and solid side plates. A hydraulic jack is fixed to the base, the platens of the machine are hardened , ground and polished.

The upper platen is provided with self-aligning action. To facilitate testing of various size spacimens, suitable size spacers are provided.
    
Hydraulic Power Pack:
•    Max. working pressure : 300 bar
•    Max. oil deliver : 10 lpm
•    Oil tank capacity : 150 ltrs
•    Hydraulic ports for connection of test frames
•    Oil flow control via servo – controlled proportional valve
•    Oil water cooling system with forced ventilation
•    Operating temperature range for servo valve : 29°C to 135°C
•    Burst pressure : 250% max. supply pressure
•    External Leakage : Zero
•    Vibration : 30g, 3 axes
•    Fluid cleanliness level per ISO 4406:1999: min. 16/14/12 and recommended 14/12/10
•    Hysteresis should not be more than 3.0 %
•    Threshold should not be less than 0.5%
•    Supply pressure : Constant

Hardware And Controlling Unit:
•    Robust , Stand alone, low power data logger with USB memory stick support.
•    Analog Resolution : 24 bit
•    Inbuilt RTC for the real in standalone mode
•    Easy Configurable Window Based Software to configure the DAQ through PC
•    Stand Alone and Real Time Data Acquisition , Keypad should have capability to configure the system.
•    LCD display with 4 line 20 characters with back light
•    Working range of load control 0.1 to 1% of full scale
•    Working range of displacement control 1 micron to 100 micron per sec
•    Operating temperature range : 45°C to 70°C
•    Display functions – channel data
•    Power supply – 230 V, 50 Hz, or 12V DC on customer requirement
•    Inbuilt battery for Real time clock
•    Accepts input as along voltage in the range of ± 2.5 V
•    Log Interval should be configurable from 1 sec to HH:MM:SS
•    System should have the capacity to interface the counter to interface the counter to interface the encoder for future expansion

Analog Inputs:
•    Maximum 8 number of analog channels
•    Maximum Input Voltage : 0-2.5 V±2.5 V
•    Accuracy 0.1%
•    Over Protection Voltage : 10V

Memory And Communication:
•    Internal Storage minimum capacity should be 8MB, Should have provision for interfacing pen drive
•    Can store on to PC which is configurable
•    Should be able to unload the stored data in USB Pen Drive

Communication Interfaces : 
•    USB & Ethernet

Recommended Computer Hardware:
•    1.9 Ghz, Pentium i5
•    8 GB RAM
-    Using multiple testing machines may require additional memory and / or a faster processor
-    32 bit system are limited to a maximum of 4GB of which only 3.25  GB is available due to system overheads.
     •     512 MB Direct x 10.0 capable video card or better
     •     500 GB HD Drive
     •     RS232 Serial Port
-    1 Integrated serial port (Not USB) where possible per testing machine
-    If RS232 serial port unavailable , then 1 USB serial port with RS232/USB adapter is required (Per machine)
•    USB Port
-    1 USB Port for use with the machine
-    1 USB Port for Printer
-    Additional ports for required measuring devices, barcode scanners etc.
•    Ethernet Port (to rub the machine)
•    DVD-ROM Drive (to run installation DVD)
•    Mouse or pointing device and keyboard supported by windows 
•    Monitor
-    32 – bit color
-    1600 x 900 (Widescreen) or higher
-    If a touch screen is used, Windows 8 is best 
•    Windows compatible printer (for reporting capabilities)
•    Windows compatible sound card and speakers (for audio playback)
•    An active Internet Connection   (for team viewer use and help desk support)

Software Requirements :
•    ENKAY Servo Software is designed for 32-bit and 64-bit operating systems running Windows 7. It does not support Windows XP and   below.

Note: A 64-bit operating system is preferred for best Performance

ENKAY Scope of Supply Software Include:
•    Desktop Computer or Laptop with licensed Windows 7 64-bit
•    ENKAY Servo Software
•    MS-Office

Note: Any Third software required has to be purchased by the Customer Directly

ENKAY Servo Software:
•    Control parameter – Load/Displacement
•    Has facility to monitor the data of channels
•    Labels of channels are configurable
•    Plots Graph – Displacement vs Time, Load vs Time, Load vs Displacement, Stress vs Strain etc.
•    Report in excel and PDF for storing the date
•    Generates graphs in effective mode

Physical Specification:
•    Power Rating of motor : 5 HP
•    Voltage : 440 V, 3 – Phase AC Supply

Compression Strength
Servo Controlled Compression Testing Machine- Capacity 3000 kN

EKE 320 - SERV:

ENKAY Series of Servo Controlled Compression Testing Machines are the finest of their types available. The rugged construction and extreme simplicity makes it possible for personal with minimum Training to operate them with ease and complete dependability.

ENKAY Series of Servo Controlled Compression Testing Machine is a fully automated version of the manual/semi-automatic Compression Testing Machine  having provision for stress and strain controlled loading. The machine having working ranges from 0.5 kN to 50 kN for 50 kN capacity and 30 kN to 3000 kN for 3000 kN capacity. The machine is available in 50 kN to 3000 kN ranges. It has provision for automatically turning the pump on and off, controlling the set pace rate/displacement rate and switching the machine off under predetermined conditions.

The control releases the pressure at the end of every run and reinitializes the machine  at the beginning of every set. Data acquisition , storage, management ad analysis are all fully automated.

The system ha essentially three parts:
•    Loading Unit
•    Hydraulic Power Pack
•    Control Unit and Display

Loading Unit:
The loading unit is fully welded construction having a cross head, base and solid side plates. A hydraulic jack is fixed to the base, the platens of the machine are hardened , ground and polished.

The upper platen is provided with self-aligning action. To facilitate testing of various size spacimens, suitable size spacers are provided.

Hydraulic Power Pack:
•    Max. working pressure : 300 bar
•    Max. oil deliver : 10 lpm
•    Oil tank capacity : 150 ltrs
•    Hydraulic ports for connection of test frames
•    Oil flow control via servo – controlled proportional valve
•    Oil water cooling system with forced ventilation
•    Operating temperature range for servo valve : 29°C to 135°C
•    Burst pressure : 250% max. supply pressure
•    External Leakage : Zero
•    Vibration : 30g, 3 axes
•    Fluid cleanliness level per ISO 4406:1999: min. 16/14/12 and recommended 14/12/10
•    Hysteresis should not be more than 3.0 %
•    Threshold should not be less than 0.5%
•    Supply pressure : Constant

Hardware And Controlling Unit:
•    Robust , Stand alone, low power data logger with USB memory stick support.
•    Analog Resolution : 24 bit
•    Inbuilt RTC for the real in standalone mode
•    Easy Configurable Window Based Software to configure the DAQ through PC
•    Stand Alone and Real Time Data Acquisition , Keypad should have capability to configure the system.
•    LCD display with 4 line 20 characters with back light
•    Working range of load control 0.1 to 1% of full scale
•    Working range of displacement control 1 micron to 100 micron per sec
•    Operating temperature range : 45°C to 70°C
•    Display functions – channel data
•    Power supply – 230 V, 50 Hz, or 12V DC on customer requirement
•    Inbuilt battery for Real time clock
•    Accepts input as along voltage in the range of ± 2.5 V
•    Log Interval should be configurable from 1 sec to HH:MM:SS
•    System should have the capacity to interface the counter to interface the counter to interface the encoder for future expansion

Analog Inputs:
•    Maximum 8 number of analog channels
•    Maximum Input Voltage : 0-2.5 V±2.5 V
•    Accuracy 0.1%
•    Over Protection Voltage : 10V

Memory And Communication:
•    Internal Storage minimum capacity should be 8MB, Should have provision for interfacing pen drive
•    Can store on to PC which is configurable
•    Should be able to unload the stored data in USB Pen Drive

Communication Interfaces : 
•    USB & Ethernet

Recommended Computer Hardware:
•    1.9 Ghz, Pentium i5
•    8 GB RAM
-    Using multiple testing machines may require additional memory and / or a faster processor
-    32 bit system are limited to a maximum of 4GB of which only 3.25  GB is available due to system overheads.
     •     512 MB Direct x 10.0 capable video card or better
     •     500 GB HD Drive
     •     RS232 Serial Port
-    1 Integrated serial port (Not USB) where possible per testing machine
-    If RS232 serial port unavailable , then 1 USB serial port with RS232/USB adapter is required (Per machine)
•    USB Port
-    1 USB Port for use with the machine
-    1 USB Port for Printer
-    Additional ports for required measuring devices, barcode scanners etc.
•    Ethernet Port (to rub the machine)
•    DVD-ROM Drive (to run installation DVD)
•    Mouse or pointing device and keyboard supported by windows 
•    Monitor
-    32 – bit color
-    1600 x 900 (Widescreen) or higher
-    If a touch screen is used, Windows 8 is best 
•    Windows compatible printer (for reporting capabilities)
•    Windows compatible sound card and speakers (for audio playback)
•    An active Internet Connection   (for team viewer use and help desk support)

Software Requirements :
•    ENKAY Servo Software is designed for 32-bit and 64-bit operating systems running Windows 7 It does not support Windows XP and below.

Note: A 64-bit operating system is preferred for best Performance

ENKAY Scope of Supply Software Include:
•    Desktop Computer or Laptop with licensed Windows 7 64-bit
•    ENKAY Servo Software
•    MS-Office

Note: Any Third software required has to be purchased by the Customer Directly

ENKAY Servo Software:
•    Control parameter – Load/Displacement
•    Has facility to monitor the data of channels
•    Labels of channels are configurable
•    Plots Graph – Displacement vs Time, Load vs Time, Load vs Displacement, Stress vs Strain etc.
•    Report in excel and PDF for storing the date
•    Generates graphs in effective mode

Physical Specification:
•    Power Rating of motor : 5 HP
•    Voltage : 440 V, 3 – Phase AC Supply