CARBON RESIDUE, CLOUD AND POUR, FLASH PONT

Carbon Residue Conradson
Ref. Standard ASTM D 189, IP 13, also suitable for ASTM D2416

EKE 501:

The apparatus consists of:

EKE 50101: Porcelain Crucible 
EKE 50102: Skidmore pattern Iron crucible , with cover
EKE 50103: Sheet Iron Crucible , with cover
EKE 50104: Circular Insulator Block
EKE 50105: Sheet Iron Hood
EKE 50106: Tripod, complete with a wire support having an opening of correct size to support sheet iron crucible at the same level as insulator block
EKE 50107: Glass Bails (2 Nos.)
 

Cloud & Pour Point Apparatus 

EKE 503:

Cloud Point: 
Ref. Standard IS:1448 (Part 10), ASTM D 2500, IP 219, ISO 3015

Low temperature properties of oils are evaluated by cloud point tests
 
Pour Points:
Ref. Standard IS:1448 (Part 10), IP15, BS:4452, ISO 3016

Consists of one each of:

EKE 50301: Bath with cover, fitted with a Drain
EKE 50302: Jacket, to receive Test Jar
EKE 50303: Graduated Jar, fitted with Cork
EKE 50304: Insulating Gasket
EKE 50305: Insulating Disc

Essential Extras:
EKE 50310: Thermometer IP 1 C, Range : -38°C to + 50°C
EKE 50311: Thermometer IP 2 C, Range : -80°C to + 20°C
 

Flash Point- Cleveland
Flash Point (Open) and Fire Point Cleveland, Electrical Heating
Ref. Standard: IS:1448 (Part 69), ASTM D92, IP 36, BS:4689, ISO 2592

EKE 504:

For determining the flash and fire points of petroleum products, except fuel oils and those products having an open cup flash below 79°C

The Apparatus consists of :

EKE 50401: Cleveland Flash Cup, Brass, with an Insulated Handle.

EKE 50402: Gas Test – Jet Assembly, Correctly positioned and pivoted from a Cast Cup Platform which is fixed to a Heating Bath.

EKE 50403: Energy Regulator, To regulate the rate of rise in temperature , 220 Volt, 50 Hz, Single Phase, AC Supply.

Essential Extras:
EKE 50410: Thermometer IP 28 C, Range : -6°C to + 110°C

Abel Flash Point Apparatus

EKE 506:

Electrical Heating, with gas test jet and electric heater with EKE50603 Energy regulator. Suitable for operation on 220V, single phase, 50Hz, AC supply.

For Determining closed cup flash point of petroleum products ,their mixtures other liquid and paints having flash point between 19ºC and 49ºC.each apparatus is supplied complete with an oil cup, cover fitted with gas test jet assembly, water bath and tripod stand, but without thermometer, in a wooden carrying case.

EKE 50601 Abel Oil Cup , with lid, shutter and gas tt jet brass

Optional extras:
EKE 50603: Heating Elements
EKE 50610: Abel Oil Cup Thermometer , IP 74, Range : -35°C to + 70°C
EKE 50611: Abel Water Bath  Thermometer , IP 74, Range : -30°C to + 80°C

Flash Point (Closed)
Pensky Martens Apparatus

EKE 508:

•    Electrical heating, with gas test jet and electric heater with EKE 50405 energy regulator.
•    Suitable for operation on 220, 50 Hz, Single Phase, AC Supply.

Essential  Extras:
•    EKE 50810: Thermometer , IP 15 C , Range : -90°C to + 110°C
•    EKE 50811: Thermometer , IP 16C, Range : -90°C to + 370°C

Replacement Part:
EKE 50801: Pensky – Martens Oil Cup
EKE 50802: Pensky – Martens Lid, Shutter with Gas Test Jet