Asphalt Content Tester
Asphalt Content Tester
Ref. Standard ASTM D6307 & EN 12697:39
EKE 590:
This machines is used to determine the asphalt content of hot mix asphalt (HMA) , paving mixtures and pavement samples by removing the asphalt in an ignition furnace by means of sample heating not by means of solvents.
Suitable for operation on 220 V, 50 Hz, 1 Phase , AC Supply
Technical Specifications:
• Working Temperature : 538 ± 2°C
• Combustion Temperature : 800°C
• Weight of the Sample : 4500 g
• Accuracy of Electrical Balance : 10 kg x 0.1 g
• Time for test results : 30 to 45 min
• End Point Sensitivity : 0.01% for 3 consecutive minutes
• Data Output : Through USB
• Chamber Size : 400 x 380 x 300 mm
• Power rating : 5 kW
Accessories:
- Sample Bucket – 2 Sets
- Lifting Handle – 1 No
- Asbestos Gloves – 1 Pair
- Safety Helmet : 1 No
Mastic Asphalt Tester
Mastic Asphalt Tester
Ref. Standard : BS 5284 & IS 1195
EKE 592:
The machine is used to determine the hardness of asphalt material the design features direct vertical loading with loading weight that rest on thrust bearing therefore load is applied to the specimen without transmitting shock to the loading column. At the end of the loading period the depth of penetration of the pin can be read from the dial gauge to an accuracy of 0.01 mm. the thermostatically controlled heater unit has a built in impeller which circulates the water to maintain an event temperature throughout.
Technical Specifications:
• Water Bath : 440 x 350 x 180 mm
• Mould Size : 150 mm dia. x 25 mm depth
• Heating Power : 1 kW
• Temperature Range : Room Temp. to 85 +/- 0.1°C
• Accuracy of penetration : 0.01 mm
